You may also like
Rockwood BF157A47 Offset Single Bar Set, 1" Diameter Pull, Pull 9" CTC, Push 33" CTC
Model: ROC-BF157A47
Rockwood BF157A47 Series 47 Offset Single Bar SetThe Rockwood BF157A47 is a Series 47 offset single bar set with a 1" diameter pull bar. Pull side: 9" center-to-center. Push side: 33"...
Rockwood
Starting at
$173.19
$148.00
ROCKWOOD Series 47 Offset Single Bar Sets
Material: Aluminum, brass, bronze, stainless steel;
Finishes: Available in standard architectural finishes;
Options:
- Engraving “PUSH” or “PULL”. Specify handing
- Base plates available similar to those shown on page A12 — use BP prefix (BPBF15747)
when ordering - Heavy duty versions of most fastening types available — use suffix HD to fastening type number (BF15647 T3HD)
ROCKWOOD OVERVIEW
Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant, and finer residences.
ENVIRONMENTAL MANAGEMENT
ASSA ABLOY is commited to protecting the quality of the environment as well as the health and safety of its employees, customers, and the community. Please see our Environmental Health and Safety Policy for details on how we are dedicated to this commitment.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Subcategory:
- Push and Pull Bars
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Door Pulls
- ANSI/BHMA:
- ANSI A156.6, J505
- Clearance:
- 2-1/2"
- Commercial/Residential:
- Commercial
- Hang Type:
- Offset Hung
- Product Model:
- BF15847
- (CTC) Center-to-Center:
- 12"
- Product Projection:
- 3-1/2"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Aluminum, Brass, Bronze, Stainless Steel
- Department:
- Door Hardware
Rockwood BF15847 US32D 33CTC – Frequently Asked Questions
1) Does the Rockwood BF15847 meet ANSI/BHMA A156.6?
It carries ANSI A156.6, J505. A156.6 is the architectural door trim standard, and the J505 type designation is what a spec writer or institutional buyer puts on the hardware schedule. If your drawing calls out a J505 pull under A156.6, this bar set answers it directly.
2) Which offset pull is ADA compliant if the Rockwood BF15847 does not suit the opening?
The Ives 8145 EZ series is a 45 degree offset door pull with heavy duty mounting hardware and is ADA compliant. It is the part to specify on an accessible opening where the offset angle matters. The Rockwood BF15847 is a commercial offset single bar set meeting ANSI A156.6 J505 with a 2-1/2 inch clearance, so on an opening where the 45 degree offset is what the drawing calls out, the Ives 8145 is the closer match.
3) Can I use a Deltana OHP620 offset handle pull in place of the Rockwood BF15847?
Check the door thickness first. The Deltana OHP620 off-set handle pull is a back-to-back set rated for doors 1-1/8 inch to 1-3/8 inch thick, which is a residential-weight door range. The Rockwood BF15847 is a commercial offset single bar set built to ANSI A156.6 J505 in aluminum, brass, bronze, or stainless steel. On a commercial opening with a heavier door leaf, the BF15847 is the part that suits it.
4) What is an offset door pull and when should I use one instead of a straight pull?
An offset pull bends away from the door face so the grip sits out from the surface, which is what the BF15847's 2-1/2 inch clearance and 3-1/2 inch projection give you. Offset is the choice on heavy entrance doors where someone pulls hard, or where a gloved hand needs room. A straight bar sits tighter to the door and reads cleaner. If a straight profile is what you want instead, the ABH AB3300 is a 1 inch diameter straight flat end pull and the Ives 8103HD is a 1 inch round straight pull with through bolt mounting.
5) What finishes does the Rockwood BF15847 come in?
Three: 613 satin bronze oil-rubbed, 626 satin chrome, and 630 satin stainless steel. On a building where the rest of the trim is already 626 or 630, pick to match, those two are the common commercial finishes and they carry across most other door hardware lines. 613 is the darker oil-rubbed bronze look for hospitality or higher-end entrances.
6) Do I have to specify handing when ordering the Rockwood 47 Series bar set?
Handing matters if you add engraving. The Series 47 offset single bar sets can be engraved PUSH or PULL, and handing has to be specified when you do. Without engraving, the offset set itself is ordered as a set. Nail the handing down before the order goes in, an engraved bar is not a stock return.
7) Can I get the Rockwood BF15847 with base plates or in a heavy duty version?
Both are order options on the Series 47 sets. Base plates are added with a BP prefix on the model number. Heavy duty versions of most fastening types are ordered by adding the HD suffix to the fastening type number. On high-traffic entrances, schools, hospitals, transit, the heavy duty fastening is the one worth specifying up front, since retrofitting stronger fasteners later means new holes.
8) What is a good alternative to the Rockwood BF15847 if I need an offset pull from another brand?
Closest in profile are the ABH AB3310 offset flat end pull and the ABH AB3330 offset round end pull, which is offered with custom length options if 12 inch centers do not suit your door. From Ives, the 8169 is a C style offset solid pull at the same 1 inch diameter with heavy duty mounting, and the 8145EZHD is a 45 degree offset. Those are single pulls, though, not a matched push-and-pull set the way the BF15847 is.
9) What is the difference between a 7/8 inch and a 1 inch bar pull for a commercial door?
The ABH AB7200 is a solid stainless steel flat end pull handle with a 7/8 inch diameter bar and through-bolt mounting, while the ABH AB3300 is a straight flat end pull at 1 inch diameter. The Rockwood BF15847 carries a 1 inch diameter pull bar and is offset hung with a 2-1/2 inch clearance. The bar diameter changes the grip and the visual weight of the hardware; where a facility is standardizing on one grip size across openings, the 1 inch parts group together and the 7/8 inch AB7200 does not.
10) What material options are there on the Rockwood BF15847 pull set?
Aluminum, brass, bronze, and stainless steel. For exterior entrances and anywhere getting cleaned with harsh chemicals, stainless is the durable pick and pairs with the 630 satin stainless finish. Brass and bronze suit interior and decorative work where the finish is part of the design.
How fast can I get the Rockwood BF15847 US32D 33CTC delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rockwood BF15847 US32D 33CTC come with a warranty?
Absolutely. The Rockwood BF15847 US32D 33CTC is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rockwood BF15847 US32D 33CTC?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Rockwood BF15847 US32D 33CTC from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.