You may also like
ROFU ASP-RECTIFIER 10 Amp Bridge Rectifier for Commercial Door Hardware
Model: ROFU-ASP-RECTIFIER
ROFU ASP-RECTIFIER 10 Amp Bridge Rectifier for Commercial Door HardwareThe ROFU ASP-RECTIFIER is a 10 Amp Bridge Rectifier designed as an electrical installation accessory for commercial door...
ROFU
$22.58
ROFU 1006 Rectifier for Electric Strikes, 8-24VAC, 10 Amp, 6-Inch 18AWG Wire Leads
The ROFU 1006 is a UL Recognized rectifier engineered for commercial electric strike applications, converting 8-24VAC input to DC power with a 10 Amp output capacity. Supplied with 6-inch, 18AWG wire leads for straightforward integration into existing access control and electric strike systems, this replacement part delivers reliable power conditioning in demanding commercial environments.
Key Features
- Wide Input Voltage Range: Accepts 8-24VAC input, providing compatibility with a broad range of power supply configurations used in commercial access control systems.
- High Current Output: Rated at 10 Amp output capacity, suitable for powering electric strikes and associated hardware in high-demand commercial installations.
- Ready-to-Connect Wire Leads: Includes 6-inch, 18AWG wire leads for quick and secure connections during installation or replacement.
- UL Recognized Component: Carries UL Recognition, ensuring the rectifier meets established safety and performance standards for use in commercial door hardware systems.
- Electric Strike Compatibility: Designed specifically as a replacement part for ROFU electric strike systems, maintaining original performance specifications.
- Commercial-Grade Construction: Built for commercial applications where consistent, reliable power conversion is essential to system integrity and security performance.
Certifications & Compliance
- UL Recognized Component
- Commercial Application Rated
Technical Specifications
- Department: Door Hardware
- Product Category: Mechanical Locks
- Product Group: Parts and Accessories
- Subcategory: Parts and Accessories
- Product Subgroup: Parts and Accessories
- Product Type: Electric Strike Parts
- Parts and Accessories Type: Replacement Parts
- Commercial/Residential: Commercial
- Product Model: 1006 ROFU
- Features: ROFU Parts and Accessories
Typical Applications
- Commercial Office Building Access Control Systems
- Educational Facility Electric Strike Installations
- Healthcare Institution Door Security Systems
- Retail Establishment Entry Control Hardware
- Industrial and Warehouse Facility Access Points
- Multi-Tenant Residential Property Security Systems
- Government and Municipal Building Access Control
Why ROFU 1006?
The ROFU 1006 Rectifier delivers professional-grade power conversion with UL Recognition and a robust 10 Amp rating across an 8-24VAC input range, making it a dependable replacement component for commercial electric strike systems. Its pre-attached 6-inch 18AWG wire leads and wide voltage compatibility ensure a straightforward fit into existing installations where consistent, code-compliant performance is required.
Manufacturer Resources
Product Specs
- Department:
- Door Hardware
- Product Category:
- Mechanical Locks
- Product Group:
- Parts and Accessories
- Subcategory:
- Parts and Accessories
- Product Subgroup:
- Parts and Accessories
- Product Type:
- Electric Strike Parts
- Parts and Accessories Type:
- Replacement Parts
- Commercial/Residential:
- Commercial
- Product Model:
- 1006 ROFU
- Features:
- ROFU Parts and Accessories
ROFU 1006 ROFU – Frequently Asked Questions
1) What does the ROFU 1006 rectifier actually do in an electric strike circuit?
The ROFU 1006 converts AC power to DC for an electric strike. It accepts 8 to 24VAC on the input side and outputs DC, rated to 10 Amps. You use it when the strike or its control board needs DC but the power supply or transformer feeding the opening is AC. It ships with 6-inch 18AWG wire leads already attached, so it wires inline between the AC source and the strike.
2) Is the 1006 a ROFU-only part or can I use it with another brand of electric strike?
ROFU specifies the 1006 as a replacement part for ROFU electric strike systems, so it is the direct swap when you are servicing ROFU hardware. Electrically it is a rectifier taking 8 to 24VAC in and delivering DC at up to 10 Amps, so the deciding factor on any other hardware is whether that hardware's voltage and current fall inside those limits.
3) My electric strike buzzes loudly on AC power. Will adding a rectifier quiet it down?
Yes, that buzz is the strike running on AC. Putting the ROFU 1006 between the 8 to 24VAC source and the strike converts the supply to DC, which is what gives an electric strike silent operation. Only do this if the strike itself is rated for DC, or is a dual-voltage unit, since an AC-only strike will not behave correctly on rectified power.
4) Is 10 Amps enough to run more than one electric strike off a single rectifier?
The 1006 is rated at 10 Amps of output, which is well above the draw of a single commercial electric strike, so it has headroom for a strike plus associated hardware on the same circuit. Add up the actual current draw of every device you intend to put on it and keep the total under that 10 Amp figure.
5) Does the ROFU 1006 rectifier have any safety listing for use in a commercial building?
It is a UL Recognized Component. That is a component-level recognition, meaning it is cleared for use inside a larger listed assembly such as a door hardware or access control system, rather than carrying a standalone end-product listing.
6) Do I need to splice in my own wire, or does the rectifier come ready to connect?
Leads are already on it. The 1006 comes with 6-inch 18AWG pigtails, so you land it with wire nuts or crimps at the strike or in the junction box. Six inches is short, so if the rectifier sits any distance from the connection point, plan on extending the leads with matching 18AWG.
7) Is the ROFU 1006 rectifier a residential part or is it built for commercial openings?
It is a commercial-duty part. ROFU classifies the 1006 as commercial, and it is sold as a replacement component for door hardware, typical of office buildings, schools, healthcare, retail, industrial facilities, multi-tenant residential and government buildings running electric strikes on access control.
How fast can I get the ROFU 1006 ROFU delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the ROFU 1006 ROFU come with a warranty?
Absolutely. The ROFU 1006 ROFU is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the ROFU 1006 ROFU?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the ROFU 1006 ROFU from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.