Manufacturer Resources
Spec Sheet
Product Specs
- Etim:
- EC000112 Toggle fixing
- Head Type:
- Round
- Inner Quantity:
- 50
- Outer Dimensions Inches:
- 9.5x4x5.8
- Outer Quantity:
- 250
- Product Group:
- Boxes & Enclosures
- Surface Protection:
- Untreated
- Unspsc:
- 31161609 Toggle bolts
- Weight Uom:
- 1.75 lbs. per 100
- With Acorn Nut:
- N
- With Hexagonal Nut:
- N
- With Washer:
- N
- Department:
- Electrical
- Product Subgroup:
- Box Covers
- Product Model:
- Other
- Product Length:
- 3 in
- Product Material:
- Steel
- Product Type:
- Round/Octagon Box Cover
Thomas & Betts 52-502 – Frequently Asked Questions
1) What exactly is the Thomas & Betts 52-502 toggle bolt?
It's a round head toggle fixing, 3 inches long, made of steel with an untreated (bare) finish. It's the fastener itself, classified as a toggle bolt, not a strap, clamp, or anchor kit.
2) Does the 52-502 toggle bolt come with a nut or washer?
No. The 52-502 ships without an acorn nut, without a hex nut, and without a washer. If your assembly calls for any of those, order them separately.
3) Will an untreated steel toggle bolt hold up in a damp or outdoor location?
Plan on indoor, dry use. The 52-502 is plain steel with no surface treatment, so there's no zinc or coating protecting it from moisture. For wet, exterior, or corrosive locations, specify a galvanized or stainless fastener instead.
4) How deep a cavity do I need behind the wall for a 3 inch toggle bolt?
The 52-502 measures 3 inches long overall, so the wings need clear space behind the substrate to swing open past that point. On hollow block, stud bays, or a suspended ceiling deck there's normally room. In a shallow furred-out cavity or over rigid insulation, check the void first, because a toggle that can't fully deploy won't hold.
5) How many Thomas & Betts 52-502 toggle bolts come in a box?
They pack 50 to the inner box and 250 to the outer carton. The outer measures 9.5 x 4 x 5.8 inches, and weight runs 1.75 lbs per 100 pieces.
6) Is the 52-502 head flat or rounded?
Round head. That leaves a raised dome on the surface rather than sitting flush, so it's fine for hanging strut, boxes, or straps against a wall, but it isn't the part to use where you need a countersunk, flush finish.
7) What part number do I order for the Thomas & Betts round head toggle bolt?
Order it as Thomas & Betts 52-502. That's the manufacturer part number, and it's a single configuration, so there are no finish or length options to pick between.
How fast can I get the Thomas & Betts 52-502 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts 52-502 come with a warranty?
Absolutely. The Thomas & Betts 52-502 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts 52-502?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts 52-502 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.