SATCO Lighting S11218 8W T10 L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$14.93
Satco Lighting SAT-S11218 8 Watt T10 LED - Frosted - Medium base - 3000K - High Lumen - 120 Volt - Non-Dimmable - Carded

SATCO Lighting S11218 8W T10 LED, Frosted, Medium Base, 3000K, High Lumen, 120V, Non-Dimmable, Carded

(No reviews yet) Write a Review

Model: S11218
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$14.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11218 8W T10 LED, Frosted, Medium Base, 3000K, High Lumen, 120V, Non-Dimmable, Carded

8 Watt T10 LED - Frosted - Medium base - 3000K - High Lumen - 120 Volt - Non-Dimmable - Carded

Manufacturer Resources

Product Specs

Amps:
0.067A
Avg Rated Hours:
15000
Burning Position:
Universal
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
No
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
T10
Lens Finish:
Frost
Lens Material:
Polycarbonate (PC)
Lumens:
1020L
Operating Frequency:
60Hz
Product Type:
Tubular
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
60W
Location Rating:
Damp
Base Material:
Ceramic / Polycarbonate (PC)
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
360
Light Temperature:
3000K
Product Category:
Light Bulbs
Product Wattage:
8W

Satco Lighting S11218 – Frequently Asked Questions

1) Will the Satco S11218 T10 LED work on a dimmer switch?
No. The S11218 8W T10 is non-dimmable, so it needs to run on a plain on/off circuit. Put it on a dimmer and you risk flicker, buzz, or a short life. If the fixture is on a wall dimmer and you can't swap the switch out, pick a lamp rated dimmable instead.
2) How bright is the 8 watt Satco T10 LED compared to the 60 watt bulb I'm replacing?
1020 lumens off 8 watts, which Satco rates as a 60 watt incandescent replacement. In practice it reads slightly brighter than a typical 60W incandescent while drawing 0.067 amps, so a circuit that carried a dozen 60W lamps now carries a fraction of that load.
3) Can I use the Satco S11218 T10 LED in a bathroom or a covered exterior porch light?
Damp location rated and listed for indoor use, so a bathroom vanity, a covered porch ceiling fixture, or an unheated basement is fine. What it is not rated for is direct exposure to rain or spray, so an open outdoor fixture or anywhere water can hit the lamp needs a wet-location rated bulb instead.
4) Can I use the Satco S11218 T10 LED on a 277 volt commercial lighting circuit?
No. It is a 120 volt, 60 Hz lamp only. On 277 volt building lighting circuits, common in commercial and institutional facilities, it will fail immediately. Confirm the circuit is 120V before ordering for a facility retrofit.
5) Is the Satco S11218 T10 LED bulb sold in California?
No. The S11218 carries a non-compliant California designation, meaning it does not meet the state's lamp regulations and should not be specified for a job site in California. For work in that state, select a lamp marked California compliant.
6) What color light does the 3000K Satco T10 LED put out, and will it match my existing warm white bulbs?
3000K is warm white, the soft yellow-white tone people expect from a residential incandescent or halogen. It will read close to other 3000K lamps but noticeably warmer than a 4000K or 5000K bulb, so don't mix it into a fixture run with cooler lamps. The color temperature is fixed, not selectable, and the CRI is 80.
7) How long does the Satco 8W T10 LED last before it needs relamping?
Rated 15,000 hours. For a property manager working out a relamp cycle, a corridor or common-area fixture burning 12 hours a day runs roughly three and a half years on one lamp; on a 24/7 stairwell it is closer to 20 months. Plan the ladder time accordingly rather than lamp by lamp.
8) Will the Satco S11218 work in a three-way lamp socket?
Not as a three-way lamp. The S11218 is a single-output, non-dimmable bulb, so in a three-way socket it will either stay at one brightness or not light on the lower setting at all. For a three-way table lamp you need a lamp specifically rated three-way.
9) Does the Satco S11218 qualify for a DLC utility rebate on a commercial lighting project?
It is not DLC approved, so it will not qualify under a utility program that requires a DesignLights Consortium listing. If the rebate is driving the job, specify a DLC-listed lamp. The S11218 is FCC compliant.
10) Is the Satco S11218 a clear filament-style tube or a frosted one?
Frosted. The lens is frost-finish polycarbonate over a white housing, which diffuses the diodes so you don't see hot spots or individual LED points in an exposed fixture. If you want the visible-filament decorative look for an open sconce or pendant, this is not that lamp.
How fast can I get the Satco Lighting S11218 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11218 come with a warranty?
Absolutely. The Satco Lighting S11218 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11218?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11218 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!