SATCO Lighting S11219 8W T10 L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$14.93
Satco Lighting SAT-S11219 8 Watt T10 LED - Frosted - Medium base - 4000K - High Lumen - 120 Volt - Non-Dimmable - Carded

SATCO Lighting S11219 8W T10 LED, Frosted, Medium Base, 4000K, High Lumen, 120V, Non-Dimmable, Carded

(No reviews yet) Write a Review

Model: S11219
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$14.93
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11219 8W T10 LED, Frosted, Medium Base, 4000K, High Lumen, 120V, Non-Dimmable, Carded

8 Watt T10 LED - Frosted - Medium base - 4000K - High Lumen - 120 Volt - Non-Dimmable - Carded

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.067A
Avg Rated Hours:
15000
Burning Position:
Universal
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
80
DLC Approved:
No
Dimmable:
No
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
T10
Lens Finish:
Frost
Lens Material:
Polycarbonate (PC)
Lumens:
1080L
Operating Frequency:
60Hz
Product Type:
Tubular
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
3 Year Limited
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
60W
Location Rating:
Damp
Base Material:
Ceramic / Polycarbonate (PC)
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
360
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
8W
Product Weight:
0.24 lb
Product Material:
Ceramic / Polycarbonate (PC)

Satco Lighting S11219 – Frequently Asked Questions

1) Can I put the Satco S11219 T10 LED on a dimmer switch?
No. The S11219 is a non-dimmable lamp. Put it on a dimmer and you risk flicker, buzz, or early failure. For a fixture on a dimmed circuit, pick a lamp specified as dimmable instead, or swap the control to a standard toggle switch.
2) Will an 8W T10 LED be bright enough to replace the 60W bulbs in my building?
Yes. The Satco S11219 draws 8 watts and puts out 1080 lumens, which Satco rates as a 60W incandescent equivalent. That is on the high side for a 60W replacement, so expect it to read brighter than the old lamp rather than dimmer.
3) Can I use this Satco T10 LED in an outdoor fixture or a bathroom?
It is an indoor lamp with a damp location rating. A covered bathroom fixture or an enclosed soffit is fine; an open outdoor fixture exposed to rain or direct weather needs a wet-location rated lamp instead.
4) Will 4000K match the bulbs already in my other fixtures?
The S11219 is 4000K, a neutral or cool white, and the color temperature is fixed (no CCT selector on the lamp). If your other openings are running 2700K or 3000K warm white, this will read noticeably cooler and bluer next to them. Color rendering is 80 CRI. For a facility standardizing on one look, pick the 4000K version everywhere or stay with your existing temperature.
5) Can I sell or install the Satco S11219 in California?
No. Satco flags this lamp as non-compliant for California, so it should not be specified for jobs in that state. Choose a California-compliant LED lamp for those openings.
6) Can the Satco S11219 be mounted base-up or sideways?
Burning position is universal, so it can run base-up, base-down, or horizontal. That matters for sconces, vanity bars, and pendants where the socket is not pointing down.
7) Does this T10 LED light all the way around, or does it throw in one direction?
It is a 360 degree beam spread with a frosted polycarbonate lens, so it puts light out around the full circumference rather than in a directional cone. That makes it a reasonable swap for an exposed tubular lamp in a vanity or a shaded fixture where you want even glow, not a spot.
8) Is the Satco S11219 a three-way bulb?
No, it is a single-output lamp. Installed in a three-way socket it will run at one light level only, or may not work at all depending on the fixture. For a three-way table or floor lamp, order a lamp specified as three-way.
9) How does the S11219 arrive, loose or packaged for retail?
It ships carded, meaning individual retail blister packaging rather than bulk sleeves. That works for counter sales and for maintenance techs pulling one at a time, but adds packaging waste on a large relamp.
How fast can I get the Satco Lighting S11219 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11219 come with a warranty?
Absolutely. The Satco Lighting S11219 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11219?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11219 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!