SATCO Lighting S11224 8W T10 L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$14.13
Satco Lighting SAT-S11224 8 Watt T10 LED - Frosted - Medium base - 3000K - High Lumen - 120 Volt - 90 CRI - Dimmable - Carded

SATCO Lighting S11224 8W T10 LED, Frosted, Medium Base, 3000K, High Lumen, 120V, 90 CRI, Dimmable, Carded

(No reviews yet) Write a Review

Model: S11224
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$14.13
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11224 8W T10 LED, Frosted, Medium Base, 3000K, High Lumen, 120V, 90 CRI, Dimmable, Carded

8 Watt T10 LED - Frosted - Medium base - 3000K - High Lumen - 120 Volt - 90 CRI - Dimmable - Carded

Manufacturer Resources

Product Specs

Amps:
0.067A
Avg Rated Hours:
15000
Burning Position:
Universal
CA Web Text:
Lawful for sale
CCT Selectable:
No
CRI:
90
DLC Approved:
No
Dimmable:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Medium
Lamp Filament:
LED
Lamp Shape:
T10
Lumens:
860L
Operating Frequency:
60Hz
Product Type:
Tubular
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
3 Year Limited - 4 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
60W
Location Rating:
Damp
Base Material:
Plastic
Location Indoor/ Outdoor:
Indoor
Product Voltage:
120V
Beam Spread Angle:
360
Light Temperature:
3000K
Product Category:
Light Bulbs
Product Wattage:
8W

Satco Lighting S11224 – Frequently Asked Questions

1) Can I use this Satco 8W T10 LED in an enclosed fixture?
Yes, it's an enclosed rated lamp, so a sealed globe, vanity shade or closed sconce is fine. It's also damp location rated, which covers a bathroom or a covered exterior soffit, but it's an indoor lamp and should not be used anywhere exposed to direct water.
2) Is the Satco S11224 T10 LED dimmable, and will it work on my existing dimmer?
The lamp is dimmable on 120V, 60Hz line voltage. Draw is only 0.067A, so a handful of these on an older magnetic or high-minimum-load incandescent dimmer may flicker or fail to dim smoothly. On a modern LED-rated dimmer it performs as intended.
3) Will this T10 bulb work in a three-way lamp socket?
No. The S11224 is not a three-way lamp. In a three-way socket it will light at one level only (typically on the high position), so for a three-way table lamp you need a lamp specifically built with three-way switching.
4) Is 90 CRI enough for retail display or a bathroom vanity?
Yes. At 90 CRI with a 3000K warm white output, colors and skin tones render accurately, which is what you want over a vanity mirror, in a hospitality guest room, or in a retail display case. Standard LED lamps sit around 80 CRI, so this is a step up in color accuracy.
5) Can this T10 be installed base-up in a ceiling fixture?
Yes, burning position is universal, so base up, base down, or horizontal all work. The 360 degree beam spread means light goes out in all directions rather than in a cone, which is what makes it suit exposed sockets, pendants, and bare-bulb vanity strips.
6) Is this lamp DLC listed for a utility rebate?
No, the S11224 is not DLC approved, so it will not qualify under programs that require DesignLights Consortium listing. It is FCC compliant and marked lawful for sale in California, so Title 20 restrictions are not a barrier.
7) Can I mix these with 2700K or 4000K bulbs, or do I need to match?
The S11224 is a fixed 3000K lamp with no CCT selection, so it cannot be field-adjusted to match a warmer 2700K or cooler 4000K fixture. Side by side in the same room the difference is visible, so relamp a given space all at 3000K.
8) How long will these Satco T10 LEDs last if I'm standardizing a building on them?
Rated average life is 15,000 hours. At roughly 12 hours a day in a corridor or lobby that works out to about three and a half years of service before relamping, which is the figure to plan a maintenance cycle around.
9) Does the frosted finish on the S11224 hide the LED diodes?
The lamp has a frosted white housing, so the light is diffused rather than showing individual points of light. That matters in an exposed socket where a clear filament-style lamp would show glare. If you specifically want a visible filament look, this is not that lamp.
10) What circuit load do a run of these Satco 8W T10 LEDs add up to?
Each lamp draws 0.067A at 120V. A 15A branch circuit loaded to the usual 80 percent continuous figure of 12A would carry roughly 179 of them on paper, so lamp load is almost never the limiting factor. Dimmer minimum load, not breaker capacity, is the constraint to watch.
How fast can I get the Satco Lighting S11224 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11224 come with a warranty?
Absolutely. The Satco Lighting S11224 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11224?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11224 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!