SATCO Lighting S11230 3.5W, JC...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$10.75

SATCO Lighting S11230 3.5W, JCD LED, Clear, 3000K, G9 Base, 120V

(No reviews yet) Write a Review

Model: S11230
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$10.75
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S11230 3.5W, JCD LED, Clear, 3000K, G9 Base, 120V

3.5 Watt - JCD LED - Clear - 3000K - G9 Base - 120 Volt

Manufacturer Resources

Product Specs

Amps:
0.029A
Avg Rated Hours:
25000
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
Clear
Lamp Filament:
LED
Lamp Shape:
T4
Lens Finish:
Clear
Lens Material:
Plastic
Lumens:
330L
Operating Frequency:
60Hz
Product Type:
LED
Three-Way:
No
Warranty:
3 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
G9 Double Loop
Base Material:
Ceramic
Incandescent Equivalent:
35W
Location Rating:
Damp
CRI:
80
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V
Beam Spread Angle:
300
Light Temperature:
3000K
Product Category:
Light Bulbs
Product Wattage:
3.5W
Product Material:
Ceramic / Polycarbonate (PC)
Product Weight:
0.03 lb

Satco Lighting S11230 – Frequently Asked Questions

1) Can the Satco S11230 G9 LED bulb be used on a dimmer?
No. The S11230 is a non-dimmable lamp, so it has to run on a straight on/off circuit. Put it on a dimmer and you risk flicker, buzz, or early failure. If the fixture is on a wall dimmer and you are not replacing the control, you need a dimmable G9 LED instead. It is also not a three-way lamp.
2) Will a 3.5W G9 LED be bright enough to replace the 35W halogen capsules in my sconces?
Yes. The Satco S11230 draws 3.5 watts and is rated as a 35W incandescent/halogen equivalent, putting out 330 lumens at 3000K warm white. Current draw is 0.029A on a 120V 60Hz circuit, so a fixture full of them pulls a fraction of what the halogens did.
3) Does this G9 bulb fit the two-pin loop socket in my existing halogen fixture?
The S11230 uses a G9 double loop base on a T4 (JCD) shaped body, which is the standard G9 capsule socket found in chandeliers, sconces, and undercabinet fixtures. The base is ceramic rather than plastic, which holds up better to socket heat. Line voltage 120V, so no transformer is involved.
4) Can I use this LED in a closed glass shade or sealed fixture?
Yes. The S11230 is an enclosed rated lamp, so it can go in a fully closed globe or sealed decorative fixture without voiding the rating. Many G9 LEDs are not, which is the usual cause of early burnout in closed shades.
5) Is this G9 LED bulb rated for a bathroom or a covered porch?
Damp location rated and listed for indoor use. That covers a bathroom vanity, a laundry room, or an enclosed covered entry. It is not a wet location lamp, so keep it out of anywhere exposed to direct rain or spray.
6) Will a clear G9 LED look like the halogen capsule it replaces in an exposed-bulb chandelier?
Close. The S11230 has a clear plastic lens and clear housing with a 300 degree beam spread, so light goes nearly all the way around the way a halogen capsule does rather than throwing forward only. Color is 3000K warm white at 80 CRI. If your other sockets currently hold frosted capsules, the clear version will read brighter and sparklier side by side.
7) Does this Satco G9 LED meet California Title 24?
Yes, the S11230 is Title 24 compliant and FCC compliant. It is not DLC listed, so if your utility rebate program requires a DLC qualified product, this lamp will not qualify for it.
8) I need to match color across a building. Is this bulb color-selectable?
No, it is fixed at 3000K warm white with no CCT selector switch. For a property standardizing on one color across sconces and chandeliers, that is an advantage: every S11230 pulled from the box reads the same 3000K at 80 CRI, with no chance a maintenance tech leaves a switch on 4000K.
9) Can this bulb be installed base-up or sideways?
Any orientation. The S11230 is rated for universal burning position, so base up, base down, or horizontal in a wall sconce all work the same. Rated life is 25,000 hours.
How fast can I get the Satco Lighting S11230 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11230 come with a warranty?
Absolutely. The Satco Lighting S11230 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11230?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11230 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.