You may also like
SATCO Lighting S11264 8W, 3ft, Extension, LED, RGBW Strip Light, Starfish IOT, 120V, 800 Lumens
8 Watt - 3FT - Extension - LED - RGBW Strip Light - Starfish IOT - 120 Volt - 800 Lumens
Manufacturer Resources
Spec Sheet
Product Specs
- Avg Rated Hours:
- 25000
- CCT Selectable:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- IP Rating:
- IP20
- Lamp Base:
- Plug
- Lamp Shape:
- Integrated LED
- Lumens:
- 800L
- Product Type:
- Tape Light
- RoHS Compliant:
- Yes
- Warranty:
- 1 Year Limited - Smart Products
- Wattage Selectable:
- No
- Product Group:
- Outdoor Lighting
- Product Subgroup:
- String and Strip
- Base Material:
- Plastic
- Location Rating:
- Damp
- Subcategory:
- Tape Light
- Certification:
- cETLus - Listed
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11264/S11264_Installation_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S11264.pdf
- Product Voltage:
- 120V
- Product Length:
- 39.37"
- Light Temperature:
- 3000K-6500K
- Product Dimension:
- L:39.36" W:0.47" H:0.12"
- Mounting Method:
- Double Coated 3M Tape 9080A
- Product Style:
- Decorative
- Product Height:
- 0.12"
- Product Category:
- Fixtures
- Product Width:
- 0.47"
- Product Wattage:
- 8W
- Product Weight:
- 0.09 lb
- Country of Origin:
- China
- Product Material:
- Plastic
- CRI:
- 80+
Satco Lighting S11264 – Frequently Asked Questions
1) Is the Satco S11264 a standalone strip light or does it need a starter kit?
The S11264 is a 3 ft extension section, not a starter run. It adds 8 watts and 800 lumens of RGBW output to an existing Satco Starfish smart strip light run, so you need the base kit with the controller and 120V plug to drive it. Ordering this by itself gets you light length with nothing to power or control it.
2) Can this Satco RGBW strip light be used outside on a covered patio?
Damp location rated and listed for indoor or outdoor use, so a covered porch, soffit, or patio ceiling is fine. The IP20 rating is the limit: it has no protection against water jets or direct rain, so keep it out of open weather, off gutter lines, and away from sprinkler spray.
3) Does this Satco strip light meet California Title 24?
Yes, the S11264 is listed Title 24 compliant, which matters on California residential and commercial permits. It is also cETLus listed for US and Canada, FCC compliant for the wireless control side, and RoHS compliant.
4) What color temperatures and colors does the Satco Starfish RGBW strip produce?
It is RGBW, so you get full color plus a selectable white channel tunable from 3000K warm white to 6500K daylight. That means one run can do warm white for a lobby in the evening and cool daylight for a work area, or full color for accent and holiday scenes, without swapping product.
5) How does the Satco S11264 strip light mount, and will it hold on a painted surface?
Mounting is double coated 3M 9080A tape already applied to the back of the strip, so it presses straight onto cove, cabinet underside, or soffit with no clips or channel required. Clean and dry the surface first; adhesive tape bonds poorly to dusty, chalky, or freshly painted finishes. At 0.12 inch tall and 0.47 inch wide it tucks into a shallow reveal.
6) Is the Satco Starfish RGBW tape light dimmable, and does it need a wall dimmer?
Yes, it dims, but through the Starfish smart control rather than a conventional wall dimmer. Level and color are set in the app or by voice through the Starfish system, so you do not wire a TRIAC dimmer ahead of it. For a property manager that means no dimmer compatibility chart to chase.
7) Does the Satco S11264 run on line voltage or does it need a low voltage driver?
The system is 120V and plug connected, so no separate low voltage transformer or driver is specified on the fixture side. You need a standard 120V receptacle within reach of the starter kit's cord. The LED is integrated, rated at 25,000 average hours, with no lamp to replace.
8) Where can I get the installation instructions and spec sheet for Satco S11264?
Satco publishes both. The installation instructions are at assets.satco.com under product S11264, and the full spec sheet is at media.satco.com/specsheets/pdf/S11264.pdf. Pull the spec sheet if you are submitting on a job that needs a cut sheet for approval.
9) What color is the Satco S11264 strip itself when it is off?
White. The strip body is plastic with a white finish, so it disappears against white cove trim, cabinet undersides, and painted soffits. There is one finish option, so no finish decision to make when ordering.
How fast can I get the Satco Lighting S11264 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11264 come with a warranty?
Absolutely. The Satco Lighting S11264 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11264?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11264 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.