You may also like
SATCO Lighting S11308 0.7W LED, C7, Clear, 2700K, Candelabra Base, 120V, Carded 2 Pack
0.7 Watt LED - C7 - Clear - 2700K - Candelabra base - 120 Volt - Carded 2 Pack
Manufacturer Resources
Product Specs
- Amps:
- 0.006A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Both
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- C7
- Lens Finish:
- Clear
- Lumens:
- 30L
- Operating Frequency:
- 60Hz
- Product Type:
- Candle
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Candelabra
- Base Material:
- Glass
- Incandescent Equivalent:
- 7W
- Location Rating:
- Wet
- CRI:
- 80
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 360
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 0.7W
Satco Lighting S11308 – Frequently Asked Questions
1) Can the Satco S11308 C7 LED bulb be used on a dimmer?
No. The S11308 is a non-dimmable lamp, so it should be run on a straight on/off circuit. On a dimmer it can flicker, buzz, or fail early. It is also not a three-way lamp, so it will not step through levels in a three-way socket.
2) Will this Satco C7 LED fit my existing candelabra sockets?
It uses an E12 candelabra base and runs on 120V, 60Hz, so it drops into standard candelabra sockets on line voltage without any adapter or driver. The lamp shape is C7, the small cone-shaped night light size.
3) Can Satco S11308 C7 bulbs be used outdoors in a string light or sign?
Yes. The S11308 carries a wet location rating and is listed for indoor or outdoor use, so exposed outdoor sockets and open string lights are fine. It is also rated for both open and enclosed fixtures, and the burning position is universal, so it can be mounted base up, base down, or sideways.
4) How bright is a 0.7W C7 LED compared to the 7W incandescent night light bulb it replaces?
It draws 0.7 watts and produces 30 lumens, which Satco rates as the equivalent of a 7W incandescent C7. Current draw is 0.006A, so a long run of these on one circuit pulls very little. Expect night light and accent level output, not task light.
5) What does the light from this Satco clear C7 LED actually look like?
Warm and yellow-toned at 2700K, matching the look of the incandescent C7 it replaces, with a CRI of 80. The lens is clear glass with an LED filament, so you see the visible filament and get a 360 degree spread rather than a one-sided beam. Good for decorative sockets, string sets, and sign work where the lamp itself is on show.
6) Is the Satco S11308 acceptable for a California Title 24 project?
Yes, it is listed as Title 24 compliant and FCC compliant. Note that it is not DLC listed, so if a utility rebate program requires a DLC qualified product, this lamp will not satisfy that.
7) How many bulbs come in a pack of Satco S11308, and how often will I be relamping?
S11308 ships as a carded 2 pack. Average rated life is 15,000 hours, so on a dusk to dawn or night light duty cycle a property manager is looking at years between changes rather than months, which is the main reason to swap incandescent C7s out of hard to reach sockets.
8) Is the S11308 available in anything other than clear?
Clear is the only finish offered under S11308. If you need a frosted or colored C7 for a decorative run, that is a different Satco part number.
How fast can I get the Satco Lighting S11308 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11308 come with a warranty?
Absolutely. The Satco Lighting S11308 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11308?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11308 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.