SATCO Lighting S11751 24W T8 L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$20.36
Satco Lighting SAT-S11751 24 Watt T8 LED - Single Pin Base - CCT Selectable - Type B - Ballast Bypass - PET Shatterproof Coated - White Finish - 72 Inches - 120-277 Volt

SATCO Lighting S11751 24W T8 LED, Single Pin Base, CCT Selectable, Type B, Ballast Bypass, PET Shatterproof Coated, White Finish, 72 Inches

(No reviews yet) Write a Review

Model: S11751
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$20.36
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11751 24W T8 LED, Single Pin Base, CCT Selectable, Type B, Ballast Bypass, PET Shatterproof Coated, White Finish, 72 Inches

24 Watt T8 LED - Single Pin Base - CCT Selectable - Type B - Ballast Bypass - PET Shatterproof Coated - White Finish - 72 Inches - 120-277 Volt

Manufacturer Resources

Product Specs

Amps:
0.200-0.087A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
Yes
DLC Approved:
No
FCC Compliant:
Yes
Housing Color:
White
Lamp Filament:
LED
Lamp Shape:
T8
Lens Finish:
Frost
Lens Material:
Glass
Lumens:
3300L/3400L/3200L
Operating Frequency:
50/60Hz
Product Type:
Linear
Three-Way:
No
Warranty:
5 Year Limited - T8 LED Bulbs - Ballast Bypass
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Single Pin
Base Material:
Glass / Plastic
Incandescent Equivalent:
100W
Location Rating:
Damp
CRI:
83
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V-277V
Beam Spread Angle:
180
Light Temperature:
4000K/5000K/6500K
Product Category:
Light Bulbs
Product Wattage:
24W

Satco Lighting S11751 – Frequently Asked Questions

1) Can I install the Satco S11751 72-inch LED tube in my existing fluorescent fixture without removing the ballast?
No. The S11751 is a Type B ballast bypass lamp, which means the existing ballast has to be removed or bypassed and line voltage wired directly to the sockets. It runs on 120V to 277V at 50/60Hz. If you want a plug-and-play lamp that works on the existing ballast, this is not the one.
2) What base does the Satco S11751 6-foot LED tube use, and will it drop into my 8-foot slimline strip?
It uses a single pin (Fa8) base and measures 72 inches, so it fits single pin slimline sockets set for a 6-foot lamp. An 8-foot slimline strip is socket-spaced for a 96-inch lamp and the 72-inch tube will not span it. Match the lamp length to your socket spacing.
3) Can I set the color temperature on this Satco T8 LED tube, or do I have to order a fixed Kelvin?
Color temperature is field selectable on the lamp: 4000K, 5000K, or 6500K. Output shifts slightly with the setting, 3300 lumens at 4000K, 3400 at 5000K, and 3200 at 6500K. For a property manager standardizing corridors or a warehouse, that means one SKU on the shelf instead of three.
4) Is this Satco LED tube safe to use over food prep areas or in a gym?
The lamp carries a PET shatterproof coating, which holds glass fragments in place if the tube is struck or broken. That is the usual requirement for food service areas, gyms, and schools. It is rated for indoor, damp locations only, so keep it out of wet or exposed outdoor installs.
5) Does this Satco T8 LED qualify for a DLC utility rebate?
No. The S11751 is not DLC approved, so it will not qualify under utility programs that require a DLC listing. It is Title 24 compliant and FCC compliant. If the rebate is driving the job, specify a DLC listed lamp instead.
6) Can this 6-foot LED tube be mounted vertically or in a cove?
Burning position is universal, so it can run horizontal, vertical, or at any angle without affecting rated life. Light spreads over a 180 degree beam, meaning output goes one direction out of the lens rather than wrapping the full tube like a fluorescent, so orient the lamp with the LED face toward the task.
7) Will this Satco LED tube work on a dimmer or a three-way switch?
No. The S11751 is not a three-way lamp, and as a ballast bypass tube it is wired straight to line voltage. Put it on a standard on/off circuit. For dimmed areas, specify a lamp or LED fixture rated for the dimming control you are using.
8) Is the Satco S11751 glass or plastic, and does the white finish matter?
Construction is glass and plastic, with a glass lens over a white housing. The white finish is the lamp body itself, not a fixture color, and it reads as a standard white tube when lit off. The PET coating over the glass is what makes it shatterproof.
How fast can I get the Satco Lighting S11751 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11751 come with a warranty?
Absolutely. The Satco Lighting S11751 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11751?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11751 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!