SATCO Lighting S11753 18W T8 LED, Recessed Double Contact HO/VHO Base, CCT Selectable, Type B, Ballast Bypass, PET Shatterproof Coated, 48 Inches
18 Watt T8 LED - Recessed Double Contact HO/VHO Base - CCT Selectable - Type B - Ballast Bypass - PET Shatterproof Coated - White Finish - 48 Inches - 120-277 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.150-0.065A
- Avg Rated Hours:
- 50000
- Ballasting Requirements:
- Ballast Bypass
- Burning Position:
- Universal
- CCT Selectable:
- Yes
- DLC Approved:
- No
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Filament:
- LED
- Lamp Shape:
- T8
- Lens Finish:
- Frost
- Lens Material:
- Glass
- Lumens:
- 2500L/2600L/2400L
- Operating Frequency:
- 50/60Hz
- Product Type:
- Tube
- Three-Way:
- No
- Warranty:
- 5 Year Limited - T8 LED Bulbs - Ballast Bypass
- Product Group:
- Lighting
- Product Subgroup:
- Lamps & Bulbs
- Bulb Base:
- Recessed Double Contact HO/VHO
- Base Material:
- Glass / Plastic
- Incandescent Equivalent:
- 90W
- Location Rating:
- Damp
- CRI:
- 83
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V-277V
- Beam Spread Angle:
- 180
- Light Temperature:
- 4000K/5000K/6500K
- Product Category:
- Light Bulbs
- Product Wattage:
- 18W
- Department:
- Electrical
Satco Lighting S11753 – Frequently Asked Questions
1) Will the Satco S11753 T8 LED fit my existing fluorescent fixture, or do I need to rewire it?
The S11753 is a Type B ballast bypass lamp, so the existing fluorescent ballast has to be removed and line voltage wired directly to the sockets. It will not run on the old ballast. Once bypassed it accepts 120V through 277V at 50/60Hz, so it works on either common commercial circuit.
2) How do I set the color temperature on this CCT selectable T8 LED?
The lamp is field selectable between 4000K, 5000K and 6500K, so one part number covers cool white through daylight. Output shifts slightly with the setting: 2500 lumens at one step, 2600 at another and 2400 at the third. CRI is 83 across the lamp. For a property manager trying to match existing rows, pick the setting that matches the neighbouring fixtures rather than ordering a different lamp.
3) Does the Satco S11753 qualify for utility rebates or California Title 24?
It is Title 24 compliant and FCC compliant. It is not DLC listed, which matters because many utility prescriptive rebate programs for linear LED require a DLC listing. If your incentive application depends on DLC, this lamp will not qualify for it.
4) Can I use this shatterproof T8 LED in a food prep area or over a gym floor?
The lamp carries a PET shatterproof coating, which contains glass and debris if the tube is struck, and it is the usual choice for food handling areas, locker rooms, gyms and corridors where falling glass is a hazard. It is rated for indoor use in damp locations, so an unconditioned warehouse or covered dock is fine, wet locations are not.
5) How much energy does an 18W LED save over the HO fluorescent tube it replaces?
At 18 watts the lamp draws 0.150 to 0.065 amps depending on line voltage, and Satco rates it as a 90 watt incandescent equivalent. Against a 4 foot high output fluorescent, which typically pulls in the 50 to 60 watt range plus ballast losses, you also drop the ballast entirely since this is a bypass lamp. Rated life is 50,000 hours.
6) Can this lamp be mounted vertically or in a cove, or does it have to lie flat?
Burning position is universal, so it can run horizontally, vertically or at any angle without affecting life. The beam spreads 180 degrees, meaning light goes out one side only, so orient the frosted lens face toward the space being lit rather than up into the fixture housing.
7) Will this T8 LED work on a dimmer or a 3-way circuit?
No. The lamp is not three-way capable and is a direct line voltage ballast bypass lamp, so it should be fed from a standard switched circuit. Put it on an occupancy sensor or a simple switch, not a phase dimmer.
How fast can I get the Satco Lighting S11753 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11753 come with a warranty?
Absolutely. The Satco Lighting S11753 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11753?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11753 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.