SATCO Lighting S16435 18W T8 L...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$32.25
Satco Lighting SAT-S16435 18 Watt T8 LED - CCT Selectable - 120-277 Volt - Single or Double Ended - Type B Ballast Bypass

SATCO Lighting S16435 18W T8 LED, CCT Selectable, 120-277V, Single or Double Ended, Type B Ballast Bypass

(No reviews yet) Write a Review

Model: S16435
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$32.25
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S16435 18W T8 LED, CCT Selectable, 120-277V, Single or Double Ended, Type B Ballast Bypass

18 Watt T8 LED - CCT Selectable - 120-277 Volt - Single or Double Ended - Type B Ballast Bypass

Manufacturer Resources

Product Specs

Amps:
0.150-0.645A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
Yes
DLC Approved:
No
Dimmable:
No
FCC Compliant:
Yes
Lamp Filament:
LED
Lamp Shape:
T8
Lens Finish:
Frost
Lens Material:
Plastic
Lumens:
2500L/2600L/2450L
Operating Frequency:
50/60Hz
Product Type:
Linear
Three-Way:
No
Warranty:
5 Year Limited - T8 LED Bulbs
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Recessed Double Contact HO/VHO
Base Material:
Polycarbonate (PC)
Incandescent Equivalent:
90W
Location Rating:
Damp
CRI:
83
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V-277V
Beam Spread Angle:
360
Light Temperature:
4000K/5000K/6500K
Product Category:
Light Bulbs
Product Wattage:
18W
Department:
Electrical

Satco Lighting S16435 – Frequently Asked Questions

1) Does the Satco S16435 T8 LED tube work with my existing fluorescent ballast?
No. The S16435 is a Type B ballast bypass lamp, so the existing fluorescent ballast has to be removed and line voltage wired directly to the sockets. It runs on 120V to 277V at 50/60Hz. If you want a lamp that drops into a working ballast with no rewiring, you need a Type A plug-and-play tube instead.
2) Can I wire the Satco S16435 with power to one end only?
Yes. It is a single or double ended lamp, so you can feed line and neutral into one socket or split them across both ends. That flexibility matters on retrofits where you are reusing existing tombstones. Either way the ballast comes out first, since this is a bypass lamp.
3) How do I set the color temperature on this CCT selectable T8 LED?
The S16435 is field selectable among 4000K, 5000K and 6500K, so one part number covers a cool white through daylight range. Output shifts slightly with the setting: 2500 lumens at 4000K, 2600 at 5000K and 2450 at 6500K. For property managers standardizing a building, this lets you stock one lamp and match whatever is already in each area.
4) Can I use this Satco T8 LED tube in a parking garage or outdoor canopy fixture?
Only in covered, damp-rated locations indoors. The S16435 is rated for indoor use and damp locations, which covers things like covered walkways, kitchens and laundry rooms, but not wet locations or direct weather exposure. For an exposed outdoor fixture you need a wet-location-rated lamp or a sealed luminaire.
5) Does this Satco T8 LED qualify for a DLC utility rebate?
No. The S16435 is not DLC listed, so it will not qualify for utility programs that require a DLC-qualified product. It is Title 24 compliant and FCC compliant. If your project is driven by rebate eligibility, specify a DLC-listed tube instead.
6) Is this 18W T8 LED dimmable?
No. The S16435 is a non-dimmable lamp, and it is not three-way capable either. On a dimmer circuit expect flicker or no start, so put it on a plain switched or occupancy-sensor circuit.
7) How much light does an 18 watt LED T8 put out compared to the fluorescent it replaces?
Up to 2600 lumens from 18 watts, with a 360 degree beam spread so it lights the full fixture rather than throwing in one direction. Satco rates it equivalent to a 90W incandescent. Color rendering is 83 CRI, which is standard for general commercial and corridor lighting.
8) What current draw should I figure for circuiting a row of these 18W T8 LED tubes?
Current draw runs 0.150A to 0.645A per lamp depending on supply voltage across the 120V to 277V range, with the high end at 120V and the low end at 277V. Use the figure for your actual circuit voltage when counting lamps per branch.
9) Can the Satco S16435 be installed vertically in a wall-mount fixture?
Yes, burning position is universal, so it can be mounted horizontally, vertically or at any angle without affecting rated life. Rated average life is 50,000 hours.
10) Is the lens on this LED tube glass or plastic?
Plastic with a frosted finish, on a polycarbonate base. The frost diffuses the LEDs so you do not see individual diodes through the tube, and the plastic construction means no glass shards if a lamp is dropped during a relamp, which matters in food service and healthcare spaces.
How fast can I get the Satco Lighting S16435 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S16435 come with a warranty?
Absolutely. The Satco Lighting S16435 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S16435?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S16435 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!