SATCO Lighting S11812 32W Commercial LED Downlight, 8in, Color Adjustable, Lumen Adjustable, 120-277V

Yes. The S11812 runs on any input from 120V through 277V at 60Hz, so the same part number works on 120V tenant circuits and on 277V commercial lighting panels. For a property manager standardizing across a building, that means one SKU on the shelf instead of two.

Color temperature is selectable on the fixture itself, with five settings: 2700K, 3000K, 3500K, 4000K and 5000K. You set it at install rather than ordering a specific color, so you can dial in a warm 2700K or 3000K to match older lobby lighting or go 4000K/5000K to match newer office areas. One stocked unit covers every space in the building.

The S11812 carries a Damp location rating and is an indoor fixture. That covers enclosed bathrooms, shower surrounds outside the direct spray zone, and interior areas with humidity. It is not a wet location fixture, so do not use it in an open soffit, exposed exterior canopy, or anywhere exposed to direct water.

Title 24 compliant, cETLus Listed, FCC compliant and RoHS compliant. The cETLus mark covers both US and Canadian installations, which matters on cross-border or multi-site specifications. Submit the S11812 spec sheet with your fixture schedule if the job requires documentation.

The S11812 is dimmable. The driver is integrated into the fixture, so there is no separate LED driver to specify, but you do need a dimmer rated for LED loads at your line voltage, and the control wiring must match the input you are feeding it (120V through 277V). Satco publishes the dimming detail in the S11812 spec sheet and install instructions.

No. The LED is integrated, with no lamp base and no replaceable bulb, so when the array or driver fails the whole fixture comes down. Rated life is 50,000 hours. For an MRO plan, that is a fixture-level replacement item, not a relamp item, which is why standardizing on one part number across a facility pays off.