SATCO Lighting S11811 23W Commercial LED Downlight, 6in, Color Adjustable, Lumen Adjustable, 120-277V
23 Watt Commercial LED Downlight - 6 in. - Color Adjustable - Lumen Adjustable - 120-277 volt
Manufacturer Resources
Product Specs
- Avg Rated Hours:
- 50000
- CCT Selectable:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Integrated
- Lamp Shape:
- Integrated LED
- Lumens:
- 900L/1200L/1750L
- Operating Frequency:
- 60Hz
- Product Type:
- Commercial Downlight Retrofit
- RoHS Compliant:
- Yes
- Warranty:
- 5 Year Limited - LED Commercial Downlights
- Wattage Selectable:
- Yes
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Commercial
- Base Material:
- Aluminum
- Location Rating:
- Damp
- Subcategory:
- Recessed
- Certification:
- cETLus - Listed
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11811/S11811_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S11811.pdf
- Product Voltage:
- 120V-277V
- Light Temperature:
- 2700K/3000K/3500K/4000K/5000K
- Product Diameter:
- 6.77"
- Product Dimension:
- H:3.84" DIA:6.77"
- Mounting Method:
- Ceiling
- Product Shape:
- Round
- Product Style:
- Utility
- Product Height:
- 3.84"
- Product Category:
- Fixtures
- Product Wattage:
- 11W/16W/23W
- Product Width:
- 6.77 in
- Product Weight:
- 1.44 lb
- Product Material:
- Aluminum
Satco Lighting S11811 – Frequently Asked Questions
1) What color temperatures and lumen outputs can I set on the Satco S11811 downlight?
Five field-selectable color temperatures: 2700K, 3000K, 3500K, 4000K and 5000K. Output is separately selectable at 900, 1200 or 1750 lumens, drawing 11W, 16W or 23W respectively. That means one part number covers warm residential-feel corridors and 5000K back-of-house areas, so a property manager or MRO buyer can stock a single SKU across a whole building and set it at install.
2) Can I run the Satco S11811 downlight on 277 volt commercial power?
Yes. It accepts any input from 120V through 277V at 60Hz, so the same fixture works on 120V tenant circuits and on 277V building lighting panels. No separate voltage version to specify.
3) Is this Satco 6 inch downlight OK to install in a bathroom or a covered exterior soffit?
It carries a damp location rating and is classified for indoor use. That covers bathrooms, shower-adjacent ceilings outside the direct spray zone, and enclosed corridors. It is not a wet location fixture, so an open soffit or anywhere exposed to direct rain calls for a wet-rated downlight instead.
4) Is the Satco S11811 dimmable, and does it meet California Title 24?
Dimmable, and listed as Title 24 compliant, which is what a California job spec usually hinges on for recessed lighting. It is also cETLus Listed for US and Canadian installation, plus FCC and RoHS compliant.
5) Do I need to buy lamps for the Satco S11811, or is the LED built in?
The LED is integrated, so there is no socket and no lamp to order or ever replace. Rated life is 50,000 hours. For a maintenance crew that means the relamping line item goes away, but at end of life the whole downlight is replaced rather than a bulb.
6) How much light should I expect from a 23W commercial downlight like the Satco S11811 in an office or corridor?
At its top setting the fixture puts out 1750 lumens on 23 watts. Dial it back to 1200 lumens at 16W or 900 lumens at 11W where the ceiling is low or fixtures are spaced tight. Setting the lower steps is also how you trim connected load to hit an energy budget without changing the layout.
7) What finish and housing material does the Satco S11811 downlight come in?
One finish, white, in a round utility trim. The body is aluminum, which is what carries heat away from the LED in a recessed can.
8) Where do I find the wiring and mounting instructions for the Satco S11811?
Satco publishes both an installation instruction sheet and a full spec sheet for S11811 as PDFs, linked in the product specifications. The fixture is ceiling mounted and recessed, so the instruction sheet is where the housing attachment and driver connection details are.
How fast can I get the Satco Lighting S11811 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11811 come with a warranty?
Absolutely. The Satco Lighting S11811 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11811?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11811 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.