You may also like
SATCO Lighting S11833 7W, LED Downlight Retrofit, 4in, CCT Selectable, 120V, Dimmable, Brushed Nickel Finish
Model: SATCO-S11833
SATCO Lighting S11833 7W, LED Downlight Retrofit, 4in, CCT Selectable, 120V, Dimmable, Brushed Nickel Finish7 Watt - LED Downlight Retrofit - 4 Inch - CCT Selectable - 120 volts - Dimmable - Brushed...
Satco Lighting
$15.01
SATCO Lighting S11834 7W, LED Downlight Retrofit, 4in, CCT Selectable, 120V, Dimmable, Bronze Finish
7 Watt - LED Downlight Retrofit - 4 Inch - CCT Selectable - 120 volts - Dimmable - Bronze Finish
Manufacturer Resources
Spec Sheet
Product Specs
- Avg Rated Hours:
- 50000
- CCT Selectable:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Medium Adapter
- Lamp Shape:
- Integrated LED
- Lumens:
- 600L
- Operating Frequency:
- 60Hz
- Product Type:
- Downlight Retrofit
- RoHS Compliant:
- Yes
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Subcategory:
- Recessed
- Certification:
- cULus - Certified;cULus - Classified
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- No
- Bulb Type:
- LED
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11834/S11834_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S11834.pdf
- Product Voltage:
- 120V
- Light Temperature:
- 2700K/3000K/3500K/4000K/5000K
- Product Diameter:
- 5.31"
- Product Dimension:
- H:3.00" DIA:5.31"
- Mounting Method:
- Ceiling
- Product Shape:
- Round
- Product Style:
- Contemporary
- Product Height:
- 3"
- Product Category:
- Fixtures
- Product Wattage:
- 7W
- Product Material:
- Aluminum
- Product Width:
- 5.31 in
- Product Weight:
- 0.364 lb
Satco Lighting S11834 – Frequently Asked Questions
1) How do I set the color temperature on the S11834, and do I need to buy separate units for each one?
One unit covers five color temperatures, 2700K, 3000K, 3500K, 4000K and 5000K, selected on the fixture itself. For a property manager relamping a building that means a single part number for warm-white guest rooms and cool-white back-of-house, instead of stocking five SKUs. Wattage is fixed at 7W and output at 600 lumens regardless of which CCT you pick, so brightness does not change when you reset the color.
2) Can I use this 4 inch LED downlight retrofit in a bathroom shower or over a kitchen sink?
The S11834 carries a Wet location rating, so a shower surround or a soffit over a sink is within its rating, provided the housing it goes into is also rated for that location. Satco designates it for indoor use, so do not put it in an open exterior soffit or under an unprotected eave.
3) Does this Satco downlight retrofit meet California Title 24?
No. The S11834 is not Title 24 compliant, so it should not be specified for new construction or alteration work in California that requires a JA8 listed source. For those jobs you need a Title 24 / JA8 listed retrofit instead. It is cULus Certified and Classified, FCC compliant and RoHS compliant.
4) Is the Satco S11834 dimmable, and what voltage does it run on?
Dimmable, on a 120V 60Hz line-voltage circuit. It is not a multi-volt fixture, so it won't work on a 277V branch common in commercial buildings; check the circuit before ordering a quantity. Dimming is done with the forward-phase or ELV dimmer the circuit already has on the line side, since the driver is integral to the retrofit.
5) Is 600 lumens from a 7W retrofit enough to replace the 65W BR30 floods in my 4 inch cans?
At 600 lumens it lands in the range of a 50W to 65W incandescent reflector lamp, so it is a reasonable one-for-one swap in corridors, closets, baths and general residential or hospitality ceilings. For high ceilings or task areas where you are reading off a work surface, plan on tighter spacing or step up to a higher-lumen downlight. Rated life is 50,000 hours, which is what makes this worth doing in a fleet of units where lamp changes cost labor.
6) What is included with the Satco S11834, and is there an install sheet?
It ships as an integrated LED unit with the medium screw-base adapter for threading into the existing socket, so no driver, lamp or housing is bought separately. Satco publishes an installation instruction sheet and a full spec sheet for the model. Each unit weighs 0.364 lb, light enough that the existing socket and torsion clips carry it without modification.
How fast can I get the Satco Lighting S11834 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11834 come with a warranty?
Absolutely. The Satco Lighting S11834 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11834?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11834 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.