SATCO Lighting S11851 15W Commercial LED Downlight, 6in, CCT Adjustable, 120-277V, Econo

Yes. The S11851 is wet location rated and listed for indoor or outdoor use, so it can go over a tub or shower, under a soffit or canopy, or in a garage or breezeway ceiling. It is cETLus listed, which covers both US and Canadian installations.

You pick it at the fixture, not on the order. The S11851 has a CCT selector with five settings: 2700K, 3000K, 3500K, 4000K and 5000K. One part number covers warm residential-feeling 2700K through daylight 5000K, so a maintenance crew can carry a single box and match whatever is already burning in the adjacent cans on site.

The S11851 measures 7.40 inches in overall diameter with a 3.46 inch height, and it is built as a 6 inch commercial downlight retrofit. The 7.40 inch trim face overlaps a nominal 6 inch ceiling opening, which is what hides the cut edge on a can swap. The 3.46 inch height is the number to check against your plenum depth before ordering.

Yes, the S11851 is dimmable. Pair it with a dimmer rated for LED loads and sized for the total connected wattage on the circuit, and mind that these are 15W fixtures, so a room full of them still adds up to a small load that some older incandescent dimmers will not hold steady at the bottom of the range.

Title 24 compliant, yes, and that is stated for the S11851 specifically. It is also RoHS compliant and FCC compliant, which is what a spec-driven institutional or government buyer usually needs on the submittal alongside the cETLus listing.

There is no lamp to change. The S11851 uses an integrated LED with an integrated base, rated at 50,000 average hours, so the light source and fixture are one assembly and the whole unit gets swapped at end of life. For an MRO stockroom that is the tradeoff worth knowing up front: nothing to relamp, no lamp SKU to carry, but no socket to drop a different lamp into either.