SATCO Lighting S11860 15W, CCT Selectable, LED Direct Wire Downlight, Gimbaled, 6in Round, Remote Driver, White

Remote driver means the LED driver is a separate component wired between the 120V branch circuit and the light engine instead of sitting inside the trim. You run line voltage to the driver, then the driver's output leads to the fixture. That keeps the trim depth down to 2.17 inches, but it does mean the driver has to live in an accessible location above or beside the ceiling, so plan for access. The fixture runs on 120V at 60Hz.

Yes, it's field CCT selectable across five settings: 2700K, 3000K, 3500K, 4000K and 5000K. For a property manager standardizing a building, that means one part number covers warm residential corridors and cooler back-of-house spaces, and you can match the setting to whatever is already installed on the floor instead of stocking five SKUs.

Bathrooms and other damp interior spaces are fine, the S11860 carries a damp location rating with an IP42 ingress rating. It is listed as an indoor fixture, so a covered exterior soffit, a parking deck, or anywhere exposed to driven rain calls for a wet-location rated downlight instead.

It is listed as California T24 Listed, and it's cETLus Listed as well. It is also FCC compliant and RoHS compliant, which matters on institutional and government submittals.

Dimmable, yes. Wattage is fixed at 15W, with no wattage-selectable switch, so output stays in the 1280 to 1400 lumen band depending on the CCT you select. If you need a field-adjustable wattage as well as color, this is not that fixture.

The gimbal lets the LED optic tilt within the 6 inch round trim, so you can aim light at artwork, a feature wall, or a sloped ceiling condition. A fixed trim only throws straight down. On a lobby or retail job where you want accent aiming from a standard recessed opening, the gimbal version is the one to spec; for general ambient coverage in corridors a fixed round trim is simpler to set and keeps a uniform ceiling appearance.

The LED is integrated, there is no lamp base and no replaceable bulb, so maintenance is a fixture swap rather than a relamp. Rated average life is 50,000 hours. For an MRO stockroom that means you carry trims, not lamps, and the driver is a separate replaceable item since it's remote mounted.

Aluminum construction, and the fixture weighs 1.06 lb. At that weight the spring clips carry it in standard drywall or T-bar tile ceilings without added support, and aluminum helps pull heat away from the LED in a tight plenum.

One configuration: Satco S11860 in white, 15W, 6 inch round gimbaled with remote driver. There is no black or brushed nickel variant under this number, so if the job calls for a dark trim you need a different Satco part.