You may also like
SATCO Lighting S11621R1 12W LED Direct Wire Downlight, Gimbaled, 4in, CCT Selectable, Square, Remote Driver, 850 Lumens, 120V
Model: SATCO-S11621R1
SATCO Lighting S11621R1 12W LED Direct Wire Downlight, Gimbaled, 4in, CCT Selectable, Square, Remote Driver, 850 Lumens, 120V12 Watt LED Direct Wire Downlight - Gimbaled - 4 Inch - CCT Selectable -...
Satco Lighting
$36.95
SATCO Lighting S11618R1 12W LED Direct Wire Downlight, Gimbaled, 4in, CCT Selectable, Round, Remote Driver, 850 Lumens, 120V
Model: SATCO-S11618R1
SATCO Lighting S11618R1 12W LED Direct Wire Downlight, Gimbaled, 4in, CCT Selectable, Round, Remote Driver, 850 Lumens, 120V12 Watt LED Direct Wire Downlight - Gimbaled - 4 Inch - CCT Selectable -...
Satco Lighting
$34.95
SATCO Lighting S11871 12W LED Low Profile Regress Baffle Downlight, 4in, Remote Driver, CCT Selectable, Square Shape, 120V
12 Watt LED Low Profile Regress Baffle Downlight - 4 Inch - Remote Driver - CCT Selectable - Square Shape - White Finish - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Avg Rated Hours:
- 50000
- CCT Selectable:
- Yes
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- IP Rating:
- IP65
- Lamp Base:
- Integrated
- Lumens:
- 750L
- Operating Frequency:
- 60Hz
- Product Type:
- Direct Wire LED Downlight
- RoHS Compliant:
- Yes
- Warranty:
- 5 Year Limited - Fixtures
- Wattage Selectable:
- No
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Retrofit
- Base Material:
- Aluminum
- Location Rating:
- Wet
- Subcategory:
- Recessed
- Certification:
- cETLus
- Location Indoor/ Outdoor:
- Indoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Instructions:
- https://assets.satco.com/dj18eqo18/image/upload/v1713463030/products/S11871/S11871_Instructions.pdf
- Specifications:
- https://media.satco.com/specsheets/pdf/S11871.pdf
- Product Voltage:
- 120V
- Product Length:
- 5.06"
- Light Temperature:
- 2700K/3000K/3500K/4000K/5000K
- Product Dimension:
- L:5.05" W:5.05" H:1.29"
- Mounting Method:
- Recessed Ceiling
- Product Shape:
- Square
- Product Style:
- Utility
- Product Height:
- 1.29"
- Product Category:
- Fixtures
- Product Width:
- 5.06"
- Product Wattage:
- 12W
- Product Weight:
- 1.03 lb
- Product Material:
- Aluminum
- Department:
- Electrical
Satco Lighting S11871 – Frequently Asked Questions
1) Will the Satco S11871 4-inch square downlight fit in a shallow ceiling with no recessed can?
Height is only 1.29 inches on the Satco S11871, with a 5.05 x 5.05 x 1.29 inch overall footprint, so it drops into a shallow plenum where a traditional can will not go. It mounts recessed in the ceiling and uses a remote driver, meaning the driver sits outside the housing opening in the ceiling cavity rather than stacked above the fixture. That is what keeps the depth down.
2) Can I use the Satco S11871 square LED downlight in a shower or a covered exterior soffit?
Shower, yes. The S11871 is IP65 and wet location rated, so it handles direct water spray in a shower or over a tub. For a soffit, note that the fixture is rated for indoor locations, so exterior use is outside what it is rated for. If you need an outdoor-rated unit, specify one listed for outdoor locations.
3) How do I set the color temperature on the Satco S11871, and can I match it to fixtures already in the building?
Color temperature is field selectable on the S11871 across five settings: 2700K, 3000K, 3500K, 4000K and 5000K. For a property manager matching existing rooms, that means one part number covers warm residential 2700K through 5000K daylight corridors, so you can stock a single fixture and dial each unit to whatever the adjacent spaces are running. Wattage is fixed at 12W and is not selectable, with 750 lumens output.
4) Does the Satco S11871 meet California Title 24 for a residential remodel?
Yes, the S11871 is listed as Title 24 compliant, which is what inspectors look for on California residential lighting. It also carries cETLus certification for US and Canadian listing, is FCC compliant and RoHS compliant.
5) Is the Satco S11871 downlight dimmable, and what voltage does it run on?
It is dimmable, and it runs on 120V at 60Hz line power. Being a direct wire fixture, it wires straight to branch circuit conductors rather than screwing into a lamp socket, so it does not work on a 277V circuit.
6) Do I need to buy a separate driver or junction box for this Satco low profile downlight?
The S11871 is a remote driver design, so the driver is a separate component that sits away from the trim up in the ceiling cavity. Plan the rough-in so there is access for it and room for the 120V connection. Satco publishes installation instructions for this model, which spell out the wiring and the ceiling cutout.
7) Should I use the square Satco S11871 or a round 4-inch downlight?
Shape is the decision here, not performance. The S11871 is square, measuring 5.05 inches on each side, which is what you want when the ceiling grid, cabinetry lines or existing square trims call for a square aperture. If the ceiling already has round 4-inch apertures, a round trim will cover the existing cutout cleanly and a square one may leave the hole visible at the corners.
8) Is 750 lumens from a 12W downlight enough for a bathroom or hallway?
At 750 lumens, the S11871 is a general-purpose downlight sized for bathrooms, closets, hallways and small utility spaces rather than high-ceiling task lighting. In practice contractors space 4-inch units like this on roughly even centers and use several per room. The regressed baffle pulls the LED back behind the trim, which cuts glare in rooms where people look up, such as a bath or a bedroom.
9) What is the Satco S11871 housing made of, and how long is it rated to last?
The body is aluminum, which pulls heat away from the LED, and the fixture is rated for 50,000 average hours. It weighs 1.03 lb, light enough to support off a drywall ceiling with the supplied clips. Finish is white, and the LED is integrated, so there is no lamp to replace over its life.
How fast can I get the Satco Lighting S11871 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11871 come with a warranty?
Absolutely. The Satco Lighting S11871 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11871?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11871 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.