SATCO Lighting S11909 7W T5 LE...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$7.64
Satco Lighting SAT-S11909 7 Watt T5 LED - Miniature bi-pin base - 6500K - 50000 Average rated hours - 700 Lumens - 120-277 Volt - Type B - Ballast Bypass - Double Ended Wiring

SATCO Lighting S11909 7W T5 LED, Miniature bi-pin Base, 6500K, 700 Lumens, Type B, Ballast Bypass, Double Ended Wiring

(No reviews yet) Write a Review

Model: S11909
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$7.64
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11909 7W T5 LED, Miniature bi-pin Base, 6500K, 700 Lumens, Type B, Ballast Bypass, Double Ended Wiring

7 Watt T5 LED - Miniature bi-pin base - 6500K - 50000 Average rated hours - 700 Lumens - 120-277 Volt - Type B - Ballast Bypass - Double Ended Wiring

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.058-0.025A
Avg Rated Hours:
50000
Ballasting Requirements:
No ballast or external driver required
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Lamp Filament:
LED
Lamp Shape:
T5
Lens Finish:
Frost
Lensed:
Yes
Lumens:
700L
Operating Frequency:
50/60Hz
Product Type:
Linear
Three-Way:
No
Warranty:
5 Year Limited - T5 LED Bulbs - Ballast Bypass
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Miniature Bi Pin
Base Material:
Glass
Incandescent Equivalent:
50W
Location Rating:
Damp
CRI:
82
Subcategory:
LED
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V-277V
Beam Spread Angle:
240
Light Temperature:
6500K
Product Category:
Light Bulbs
Product Wattage:
7W
Product Length:
21 in
Product Material:
Glass
Product Weight:
0.13 lb

Satco Lighting S11909 – Frequently Asked Questions

1) Do I have to remove the existing fluorescent ballast to use the Satco S11909 T5 LED tube?
Yes. The S11909 is a Type B ballast bypass lamp and needs no ballast or external driver, so the existing fluorescent ballast has to be removed or bypassed and line voltage run to the sockets. It is wired double ended, meaning line goes to one end and neutral to the other. Leave the ballast in place and the lamp will not operate correctly.
2) Can I run these Satco T5 LED tubes on 277 volt commercial circuits?
Yes. The S11909 accepts 120 to 277 volts at 50/60 Hz, drawing 0.058 to 0.025 amps depending on supply voltage, so the same lamp works on 120V residential branch circuits and 277V commercial lighting circuits.
3) Is this 6500K T5 LED going to match the other tubes in my building?
At 6500K this is a cool daylight white, the bluest end of the white range, with 82 CRI. It will not match 3500K or 4000K lamps in adjacent fixtures, and the color is fixed, not CCT selectable. If your other openings are running neutral or warm white tubes, order the matching color temperature instead of mixing.
4) Can I put this on a dimmer switch?
No. The S11909 is non-dimmable. Wired to a dimmer it can flicker, buzz, or fail early. Use a standard line voltage switch, and if the space needs dimming you will need a dimmable lamp and compatible control.
5) Is this T5 LED tube OK in an enclosed or damp location fixture?
Enclosed rated, so it can go in a closed or gasketed fixture without voiding the lamp rating, and it carries a damp location rating. That covers covered exterior soffits, parking garages, and bathrooms. It is not rated wet, so do not use it where it will see direct water.
6) How much light do I get compared with the fluorescent tube I am taking out?
700 lumens from 7 watts, rated as a 50W incandescent equivalent, with a 240 degree beam spread and a frosted lens to diffuse the output. In a strip or undercabinet fixture the wide spread spreads light much like the fluorescent it replaces rather than throwing a narrow beam.
7) Does this Satco T5 LED qualify for California Title 24 work?
Yes, the S11909 is listed as Title 24 compliant and FCC compliant. Note that it is not DLC listed, so it will not satisfy utility rebate programs that require DLC qualification.
8) Does it matter which way up these tubes are installed in the fixture?
No. Burning position is universal, so the S11909 can be mounted base up, base down, horizontal, or at any angle. On double ended wiring, what does matter is getting line to the correct end socket.
9) How long before we are back up the ladder relamping these?
Rated at 50,000 average hours. On a 12 hour daily schedule that is roughly 11 years of service, which is why MRO buyers standardize on ballast bypass LED tubes in hard to reach strip fixtures.
10) Is the S11909 a glass tube or plastic?
Glass, both the tube body and the base material, with a frosted lens. It weighs 0.13 lb, so pack these with the care you would give a fluorescent lamp rather than treating them as shatterproof plastic.
How fast can I get the Satco Lighting S11909 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11909 come with a warranty?
Absolutely. The Satco Lighting S11909 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11909?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11909 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!