SATCO Lighting S11954 5 Foot, ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$12.44
Satco Lighting SAT-S11954 5 Foot - 22 Watt - Linear LED T8 - Type B Ballast Bypass - G13 Bi-Pin Base - 80 CRI - 5000K

SATCO Lighting S11954 5 Foot, 22W, Linear LED T8, Type B Ballast Bypass, G13 Bi-Pin Base, 80 CRI, 5000K

(No reviews yet) Write a Review

Model: S11954
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$12.44
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S11954 5 Foot, 22W, Linear LED T8, Type B Ballast Bypass, G13 Bi-Pin Base, 80 CRI, 5000K

5 Foot - 22 Watt - Linear LED T8 - Type B Ballast Bypass - G13 Bi-Pin Base - 80 CRI - 5000K

Manufacturer Resources

Product Specs

Amps:
0.183-0.079A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
No
FCC Compliant:
Yes
Housing Color:
White
Lamp Filament:
LED
Lamp Shape:
T8
Lens Finish:
Frost
Lens Material:
Glass
Lumens:
2800L
Operating Frequency:
50/60Hz
Product Type:
Linear
Three-Way:
No
Warranty:
5 Year Limited - T8 LED Bulbs - Ballast Bypass
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Medium Bi Pin
Base Material:
Glass
Incandescent Equivalent:
40W
Location Rating:
Damp
CRI:
83
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V-277V
Beam Spread Angle:
160
Light Temperature:
5000K
Product Category:
Light Bulbs
Product Wattage:
22W
Department:
Electrical

Satco Lighting S11954 – Frequently Asked Questions

1) Can I drop the Satco S11954 5-foot LED T8 into my existing fluorescent fixture without touching the wiring?
No. The S11954 is a Type B ballast bypass lamp, which means the existing fluorescent ballast has to be removed and line voltage wired directly to the sockets. It will not run off a working fluorescent ballast. If you want a lamp that works with the ballast still in place, you need a Type A (plug-and-play) tube instead.
2) Can I use this LED tube in a parking garage or outdoors under a canopy?
The S11954 is rated for indoor use and for damp locations only. That covers a covered walkway, a cooler, or a shop with humidity, but not a wet location with direct water exposure. For exposed outdoor positions you need a wet-location-rated fixture and lamp.
3) Will this 22W LED tube dim on my existing dimmer or occupancy sensor dimming control?
No. The 22 watt S11954 is non-dimmable. Put it on a plain switched circuit. On a dimmer it can flicker or fail early, so if dimming is a requirement for the space, specify a dimmable tube instead.
4) Does the Satco S11954 qualify for a DLC utility rebate?
No. It is not DLC listed, so it will not qualify under utility programs that require a DesignLights Consortium listing. It is Title 24 compliant and FCC compliant. If the rebate is what is driving the retrofit, you need to select a DLC-listed tube.
5) Is this tube glass or plastic, and does that matter for a food or healthcare space?
The lens and base material are both glass with a frost finish and a white housing. Glass tubes handle heat well and will not yellow, but they break like a fluorescent lamp does. For food prep areas, gyms, or anywhere breakage is a concern, a shatter-resistant or plastic-bodied tube is the safer specification.
6) How long will these last before a maintenance crew has to go back up the ladder?
Average rated life is 50,000 hours. Running 12 hours a day, that is roughly 11 years of service, which is why T8 LED retrofits get specified across whole buildings at once rather than lamp by lamp. Keep in mind the sockets are rewired for ballast bypass, so a future relamp has to use another Type B tube.
7) Does it matter which way the tube faces, or whether the fixture is mounted vertically?
Burning position is universal, so the lamp can be installed horizontally, vertically, or at an angle with no derating. The beam spread is 160 degrees, so aim the frosted lens side toward the space you are lighting rather than up into the housing.
How fast can I get the Satco Lighting S11954 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11954 come with a warranty?
Absolutely. The Satco Lighting S11954 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11954?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11954 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!