SATCO Lighting S11964 18W T8 LED, 4 Foot, 4000K, Recessed Double Contact Base, 2500 Lumens, Type B, Ballast Bypass, Double Ended Wiring
18 Watt T8 LED - 4 Foot - 4000K - Recessed Double Contact base - 50000 Average rated hours - 2500 Lumens - Type B - Ballast Bypass - Double Ended Wiring
Manufacturer Resources
Product Specs
- Amps:
- 0.150-0.065A
- Avg Rated Hours:
- 50000
- Ballasting Requirements:
- Ballast Bypass
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- No
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Filament:
- LED
- Lamp Shape:
- T8
- Lens Finish:
- Frost
- Lens Material:
- Glass
- Lumens:
- 2500L
- Operating Frequency:
- 50/60Hz
- Product Type:
- Tube
- Three-Way:
- No
- Warranty:
- 5 Year Limited - T8 LED Bulbs - Ballast Bypass
- Product Group:
- Lighting
- Product Subgroup:
- Lamps & Bulbs
- Bulb Base:
- Recessed Double Contact HO/VHO
- Base Material:
- Glass
- Incandescent Equivalent:
- 90W
- Location Rating:
- Damp
- CRI:
- 82
- Subcategory:
- LED
- Location Indoor/ Outdoor:
- Indoor/Outdoor
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V-277V
- Beam Spread Angle:
- 160
- Light Temperature:
- 4000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 18W
- Department:
- Electrical
Satco Lighting S11964 – Frequently Asked Questions
1) Does this Satco 18W T8 LED need the existing ballast, or does it have to be removed?
It's a Type B ballast bypass lamp, so the ballast gets removed or disconnected and line voltage is wired straight to the sockets. It is wired double ended, meaning line goes to one end of the lamp and neutral to the other. If you want a lamp that runs on the existing ballast with no rewiring, this is the wrong type.
2) Can this Satco T8 LED be put on a dimmer?
No. The 18W S11964 is non-dimming and is not three-way capable. On a dimming circuit it will either not dim, flicker, or fail. For dimmed spaces specify a dimmable LED tube and matched driver instead.
3) Can I use this LED tube in an enclosed or a damp location like a parking garage or a vapor tight fixture?
It is an enclosed rated lamp, so sealed and gasketed fixtures are fine. It carries a damp location rating and is listed for indoor or outdoor use, which covers covered walkways, garages, and vapor tight strips. Damp is not wet, so avoid direct water exposure or open rain.
4) Will this lamp satisfy California Title 24 on a retrofit, and is it DLC listed for utility rebates?
The S11964 is Title 24 compliant and FCC compliant. It is not DLC approved, so it will not qualify for utility rebate programs that require a DesignLights Consortium listing. If the rebate drives the project, specify a DLC listed tube.
5) Can one lamp cover both 120V and 277V circuits in a building?
Yes. The S11964 runs on 120V through 277V at 50/60Hz, drawing 0.150A to 0.065A across that range, so the same lamp works on 120V corridors and 277V commercial lighting circuits. That lets a facility stock a single part number.
6) Is this 4000K T8 going to match the tubes already in my other fixtures?
At 4000K it reads as a neutral cool white, the common commercial office and corridor color. It is fixed, not color selectable, so if the rest of your building is 3500K or 5000K the difference will be visible side by side. Output is 2500 lumens with 82 CRI.
7) What part number do I order for an 18W 4000K recessed double contact T8 LED from Satco?
Order Satco MPN S11964. It's the 18W, 4 foot, 4000K T8 LED with a Recessed Double Contact HO/VHO base, 2500 lumens, Type B ballast bypass, double ended wiring, in the frost finish.
8) Does it matter which way up the lamp is installed in the fixture?
No. Burning position is universal on this 4 foot T8, so it can run horizontally in a troffer, vertically in a wall strip, or base up or down without affecting performance.
9) Is the Satco S11964 glass or plastic, and will it look like a frosted tube?
The tube is glass with a frost lens finish and a white housing, so the diffusion looks like a standard frosted fluorescent rather than a clear lamp with visible diodes. Glass construction is worth knowing where impact is a concern, such as gyms or warehouse aisles.
How fast can I get the Satco Lighting S11964 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S11964 come with a warranty?
Absolutely. The Satco Lighting S11964 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S11964?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S11964 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.