You may also like
SATCO Lighting S12114 3.5W, T7 LED, Clear, Intermediate Base, 3000K, 350 Lumens, 120V, Carded
3.5 Watt - T7 LED - Clear - Intermediate base - 3000K - 350 Lumens - 120 Volt - Carded
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.029A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- No
- FCC Compliant:
- Yes
- Lamp Base:
- Intermediate
- Lamp Filament:
- LED Filament
- Lamp Shape:
- T7
- Lens Finish:
- Clear
- Lumens:
- 350L
- Operating Frequency:
- 60Hz
- Product Type:
- Tubular
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 40W
- Location Rating:
- Damp
- Base Material:
- Glass
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 3.5W
- Product Material:
- Glass
- Product Weight:
- 0.02 lb
Satco Lighting S12114 – Frequently Asked Questions
1) Can I put the Satco S12114 LED on a dimmer?
No. The 3.5W T7 filament LED is non-dimmable. On a dimmer circuit expect flicker, buzz, or no start at the low end, and the driver can fail early. If the fixture is on a dimmer, either replace the switch with a standard toggle or specify a dimmable LED lamp instead.
2) What incandescent bulb does the Satco 3.5W T7 LED replace?
It replaces a 40W incandescent, putting out 350 lumens at 3.5 watts on 120V. That is roughly a tenth of the draw for the same light, at 0.029A per lamp, which matters when you are relamping a long run of tube lights or sign fixtures on one circuit.
3) Can I install the Satco S12114 T7 LED in a covered outdoor fixture or a bathroom?
Damp location rated, so a bathroom, covered porch, or soffit fixture is fine. It is not wet-location rated, so keep it out of anywhere it takes direct rain or spray. For an exposed exterior fixture you need a wet-rated lamp.
4) Is the 3000K on this Satco T7 LED going to match the warm white bulbs already in my building?
3000K is warm white, the standard soft-white tone most hospitality and residential fixtures are lamped with. It will not match a 2700K vintage-warm lamp side by side, and it is clearly warmer than a 4000K or 5000K commercial white. The color temperature is fixed, not selectable, so every unit lands on the same tone, which is what you want when standardizing a fleet of fixtures. CRI is 80.
5) Can the Satco 3.5W T7 LED be mounted base-up or sideways?
Burning position is universal, so base-up, base-down, or horizontal all work. That matters on sign cans, mirror bars and appliance fixtures where the socket orientation is fixed and you cannot choose. Beam spread is 300 degrees, so the clear filament lamp throws light nearly all the way around rather than in one direction.
6) Is the Satco S12114 a clear filament-style bulb or a frosted LED?
Clear glass with an LED filament, so the filament strips are visible through the tube the way an old exposed incandescent looks. Use it where the bulb is on show, in an open fixture or a bare socket. If the lamp sits behind a diffuser, or if a visible bright filament will glare into someone's eye line, a frosted lamp is the better call.
7) Will the Satco S12114 work on a three-way socket or a 277V circuit?
No on both. It is a single-output lamp with no three-way function, so in a three-way socket it will light at one level only. It is a 120V 60Hz lamp, so line voltage residential and light commercial circuits only, not 277V.
8) How long does the Satco 3.5W intermediate base LED last before relamping?
Rated 15,000 hours. On a fixture running 12 hours a day that is a bit over three years before you are back on the ladder, which is the number that decides whether a hard-to-reach socket is worth converting from incandescent.
9) Does the Satco S12114 LED qualify for a DLC utility rebate?
It is not DLC listed, so it won't qualify under a DesignLights Consortium rebate program. It is FCC compliant, which is the electronic emissions piece facilities people ask about when LEDs go in near radios or AV gear.
10) Does the Satco S12114 come in a bulk case or individually packaged?
It ships carded, meaning a single lamp on a retail blister card rather than a bulk sleeve. Order by MPN S12114, in clear only.
11) Can I sell or install the Satco S12114 LED bulb in California?
Yes, the S12114 is lawful for sale in California, so it clears the state lamp regulations that pull a lot of legacy bulbs off the shelf.
How fast can I get the Satco Lighting S12114 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12114 come with a warranty?
Absolutely. The Satco Lighting S12114 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12114?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12114 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.