You may also like
SATCO Lighting S12115 4.5W, B11 LED, Clear, 350 Lumens, 3000K, European Base, 120V
4.5 Watt - B11 LED - Clear - 350 Lumens - 3000K - European base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.038A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- B11
- Lens Finish:
- Clear
- Lumens:
- 350L
- Operating Frequency:
- 60Hz
- Product Type:
- Candle
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- European Intermediate
- Base Material:
- Glass
- Incandescent Equivalent:
- 40W
- Location Rating:
- Damp
- CRI:
- 80
- Subcategory:
- LED
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
Satco Lighting S12115 – Frequently Asked Questions
1) Does the Satco S12115 B11 LED use a candelabra base or something else?
It takes a European Intermediate base, not the standard candelabra base common on US chandelier lamps. If your fixture sockets are E12 candelabra, this lamp will not thread in. Check the socket before ordering a case for a chandelier or sconce retrofit.
2) What incandescent candle bulb does the Satco S12115 replace?
It replaces a 40 watt incandescent B11 candle lamp while drawing 4.5 watts at 120 volts, 0.038 amps. Light output is 350 lumens at 3000K warm white with a clear lens, so it reads as a traditional warm candle rather than a cool white LED.
3) Can the Satco S12115 go in a bathroom vanity or a covered exterior porch fixture?
It carries a damp location rating, which covers bathrooms, covered porches, and soffits where it won't take direct water. It is not rated for wet locations, so keep it out of open exterior fixtures or anywhere spray hits the lamp.
4) Is this Satco 4.5W B11 LED filament bulb dimmable?
Yes, it's dimmable, and it uses an LED filament rather than a diode array, so the clear glass shows the lit filament the way a decorative incandescent does. Line voltage is 120V at 60Hz. On older magnetic or high-wattage-minimum dimmers, a handful of 4.5W lamps may not draw enough load to dim smoothly, so a LED-rated dimmer is the safer pairing.
5) Can I install this candle lamp base up in a chandelier, or does it have to point up?
Burning position is universal, so base up, base down, or horizontal are all fine. That matters for chandeliers and wall sconces where sockets point in different directions on the same fixture. The clear filament lamp also throws a 300 degree beam spread, so it lights around the fixture rather than in one direction.
6) Does this Satco LED candle bulb meet California Title 24?
Yes, it is Title 24 compliant and FCC compliant, which is what a spec writer or facilities buyer needs for California residential and hospitality work. It is not DLC listed, so it won't qualify for utility rebate programs that require DLC.
7) Will the S12115 match the color of the other warm bulbs in my building?
Color temperature is fixed at 3000K with a CRI of 80, and it is not CCT selectable, so every lamp out of the box is the same warm white. If your other openings are lamped at 2700K the difference will be visible side by side; 3000K reads slightly crisper.
8) How long will these last in a hotel or multi-family chandelier before relamping?
Average rated life is 15,000 hours. At roughly 12 hours a day of lobby or corridor use that is several years between relamps, which is the case for standardizing a property on filament LED over incandescent candles that fail in under a year.
9) Does the Satco S12115 work in a three-way socket?
No. It is not a three-way lamp, so in a three-way socket it will run at a single output level rather than stepping. For step control, pair it with a dimmer instead, since the lamp is dimmable.
How fast can I get the Satco Lighting S12115 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12115 come with a warranty?
Absolutely. The Satco Lighting S12115 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12115?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12115 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.