You may also like
SATCO Lighting S12117 4.5W, B11 LED, Frosted, 350 Lumens, 3000K, European Base, 120V
4.5 Watt - B11 LED - Frosted - 350 Lumens - 3000K - European base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.038A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- B11
- Lens Finish:
- Frost
- Lumens:
- 350L
- Operating Frequency:
- 60Hz
- Product Type:
- Candle
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- European Intermediate
- Base Material:
- Glass
- Incandescent Equivalent:
- 40W
- Location Rating:
- Damp
- CRI:
- 80
- Subcategory:
- LED
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 300
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
Satco Lighting S12117 – Frequently Asked Questions
1) What incandescent candle bulb does this 4.5W Satco LED replace?
It replaces a 40 watt incandescent. The S12117 draws 4.5 watts and puts out 350 lumens, so you get comparable candle-lamp output at roughly a tenth of the load. Handy when you are re-lamping a chandelier with a dozen sockets and want to drop the circuit draw.
2) Can this B11 LED bulb go in a bathroom vanity or a covered porch fixture?
It carries a Damp location rating, so an enclosed bathroom vanity or a covered, protected exterior fixture is fine. Direct rain or a wet location is not. Burning position is universal, so it can be installed base up, base down, or horizontal without affecting life.
3) Is the Satco S12117 candle LED dimmable?
Yes, it is a dimmable lamp on 120V, 60Hz. Dimming performance still depends on the dimmer itself, so an LED-rated dimmer is the right pairing. Current draw is 0.038A per lamp, which is why old dimmers sized for incandescent loads can sit below their minimum load when a whole fixture is converted.
4) What color light does the 3000K Satco S12117 give, and will it match my other bulbs?
3000K is warm white, a touch crisper than the 2700K soft white most incandescent candles produce. CRI is 80. If the rest of a chandelier or a corridor run is 2700K, mixing will show, so re-lamp the whole fixture at one temperature. The lamp is single-temperature, not CCT selectable.
5) How long does the Satco S12117 LED candle last in a hotel or lobby fixture?
Rated average life is 15,000 hours. On a lobby or corridor fixture running about 12 hours a day that is roughly three and a half years between re-lamps, which is the number that matters when you are pricing labor to get a lift under a chandelier.
6) Does this Satco candle LED meet California Title 24?
Yes, the S12117 is Title 24 compliant and FCC compliant. That covers the residential lighting requirement California jobs get held up on. It is not a DLC listed lamp, so it will not qualify for utility rebate programs that require DLC.
7) Does the frosted finish on this Satco filament candle bulb hide the LED filaments?
The frosted lens diffuses the LED filaments so you see a soft glow rather than bright filament lines. That is the version to use in open chandeliers and sconces where the lamp is visible and glare matters. The glass body spreads light over a 300 degree beam, so it lights the room rather than throwing a beam one direction.
8) Can I use the S12117 in a three-way lamp socket?
No. It is a single-output lamp with no three-way function, so in a three-way socket it will simply run at full output on the positions that energize it. For three-way behavior you need a lamp specifically built for it.
How fast can I get the Satco Lighting S12117 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12117 come with a warranty?
Absolutely. The Satco Lighting S12117 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12117?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12117 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.