SATCO Lighting S12434 13.5W LED A19, Soft White, Medium Base, 3000K, 90 CRI, 120V
13.5 Watt LED A19 - Soft White - Medium Base - 3000K - 90 CRI - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.113A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- A19
- Lens Finish:
- Soft White
- Lens Material:
- Glass
- Lumens:
- 1500L
- Operating Frequency:
- 60Hz
- Product Type:
- A-Shape Bulb
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Lighting
- Product Subgroup:
- Lamps & Bulbs
- Incandescent Equivalent:
- 100W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 13.5W
- Product Material:
- Aluminum / Glass
- Product Weight:
- 0.09 lb
- Department:
- Electrical
Satco Lighting S12434 – Frequently Asked Questions
1) Can I use this Satco 13.5W A19 bulb in an outdoor porch or covered entry fixture?
It is rated for both indoor and outdoor use and carries a wet location rating, so an exposed porch fixture, post lamp, or covered entry is fine. Burning position is universal, meaning it can be installed base up, base down, or horizontal without affecting life.
2) Is the Satco S12434 A19 LED dimmable?
Yes, the S12434 is a dimmable lamp. It is not a three-way bulb, so it will not step through low/medium/high in a three-way socket. For dimming you need a standard 120V dimmer circuit; the lamp runs at 60Hz and pulls 0.113 amps.
3) Is 3000K too warm or too cool for apartment units and common areas?
3000K is a soft white, warm-neutral tone, noticeably warmer than 4000K but cleaner than the 2700K yellow of an old incandescent. It is the common choice for residential interiors, corridors, and hospitality where you want warmth without amber. The color is fixed, not CCT selectable, so every lamp in a building order will match.
4) Does the Satco S12434 have good enough color rendering for retail or hospitality spaces?
It renders at 90 CRI, which is the threshold most retail, gallery, healthcare, and hospitality specs call for when skin tones and merchandise color matter. Standard commodity LED A19 lamps typically sit around 80 CRI.
5) Is this a filament-style LED bulb, and will the light look right in an open or exposed fixture?
Yes, the S12434 is an LED filament lamp with a glass lens in a soft white finish, built on an aluminum and glass base. The soft white coating diffuses the filaments rather than leaving them visible like a clear vintage lamp. Beam spread is 320 degrees, so it throws light nearly all the way around, which suits open shades, sconces, and bare-socket fixtures where an omnidirectional pattern matters.
6) Can I sell or install the Satco S12434 in California?
Yes. The S12434 is flagged lawful for sale in California. It is also FCC compliant. It is not a DLC-listed product, so if a utility rebate program requires DLC qualification, this lamp will not qualify for it.
7) How many of these 13.5W LED bulbs can I put on one 15 amp lighting circuit?
Each S12434 draws 0.113 amps at 120V, so the current load is minimal even in large fixture counts. Sizing to the usual 80 percent continuous load allowance on a 15 amp circuit (12 amps), the lamps themselves are not the limiting factor; ballast-free LED inrush and the fixture count your local code allows will decide the layout.
8) What is the rated life on the Satco S12434, and how does that work out for a relamping schedule?
Rated average life is 15,000 hours. On a corridor or exterior fixture running roughly 12 hours a day that works out to a little over three years before the scheduled group relamp; on a 4 hour a day residential fixture it is about ten years.
How fast can I get the Satco Lighting S12434 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12434 come with a warranty?
Absolutely. The Satco Lighting S12434 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12434?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12434 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.