You may also like
SATCO Lighting S12420 8.2W LED A19, Soft White, Medium Base, 3000K, 90 CRI, 120V
8.2 Watt LED A19 - Soft White - Medium Base - 3000K - 90 CRI - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.068A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Base:
- Medium
- Lamp Filament:
- LED Filament
- Lamp Shape:
- A19
- Lens Finish:
- Soft White
- Lens Material:
- Glass
- Lumens:
- 800L
- Operating Frequency:
- 60Hz
- Product Type:
- Type A
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Wet
- Base Material:
- Aluminum / Glass
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 320
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 8.2W
- Product Weight:
- 0.07 lb
- Country of Origin:
- China
- Product Material:
- Aluminum / Glass
Satco Lighting S12420 – Frequently Asked Questions
1) Can the Satco S12420 LED A19 be used in an enclosed fixture?
Yes. The S12420 is an enclosed rated lamp, so it can go in a closed globe, a jelly jar, or a sealed ceiling fixture where heat build-up would shorten the life of a lamp that isn't rated for it. That matters on a property where the same 60W-equivalent replacement is going into hallway drum fixtures and open table lamps alike, since one part number covers both.
2) Is the Satco S12420 A19 LED bulb rated for outdoor and wet locations?
Wet location rated, and listed for both indoor and outdoor use. That covers exterior porch and entry fixtures, covered walkways, and damp areas like bath and laundry, not just dry interior rooms. It runs on standard 120V, 60Hz line power.
3) How bright is the Satco S12420 8.2W LED compared to the 60 watt bulb I'm pulling out?
800 lumens at 8.2 watts, which is the standard 60 watt incandescent replacement level. So the light output matches what's in the fixture now while pulling roughly a seventh of the wattage. Current draw is 0.068A, so a circuit that was loaded with incandescents will have a lot of headroom after the swap.
4) Is the Satco S12420 dimmable, and will it match the color of my other 3000K bulbs?
Dimmable, at a fixed 3000K soft white color temperature. It is not a CCT selectable lamp, so there is no switch on the bulb to change color, which is what you want when you're standardizing a building and need every fixture to read the same. Order the same part number across the property and the color holds.
5) Does the Satco S12420 work in a 3-way lamp socket?
No. This is a single-level lamp, not a 3-way. In a 3-way socket it will run at one output level only, so if the fixture is meant to step through low, medium, and high you need a 3-way rated A19 instead. It does dim on a standard dimmer circuit, which is a different thing from 3-way switching.
6) Is 90 CRI worth specifying for a hotel or retail space?
Yes, and that's the main reason to pick this lamp over a commodity A19. At 90 CRI colors render close to natural light, so paint, fabric, wood tone, and skin tone read correctly. Guest rooms, lobbies, healthcare spaces, and any retail or showroom application where merchandise color matters are where the difference is visible. A typical 80 CRI bulb flattens reds in particular. Paired with the 3000K soft white tone, this is the warm, accurate combination most hospitality and multi-family interiors are specified to.
7) Is the Satco S12420 a filament style bulb, and will the light look like an old incandescent?
It's an LED filament lamp with a glass lens in a soft white finish, so you see the diffused warm glow of a traditional bulb rather than the visible diode array on a plastic-domed LED. The beam spread is 320 degrees, close to the all-around throw of an incandescent, which is why it works in table lamps, sconces, and open fixtures where light needs to go up as well as down. Construction is aluminum and glass.
8) How long does the Satco S12420 A19 last before it needs relamping?
Rated at 15,000 average hours. On a common area or exterior fixture burning roughly 12 hours a day that's about three and a half years between relamps, which is what makes bulk standardization on one part number practical for a maintenance crew rather than a per-fixture decision.
9) Can I use the Satco S12420 on a California job?
Yes, the S12420 is lawful for sale in California, so it can be specified and shipped on California work without a substitution. It's also FCC compliant, which matters where lamps sit near radio, AV, or life-safety electronics that RF noise from a cheap driver can interfere with.
10) Does the Satco S12420 qualify for a DLC utility rebate?
No, this lamp is not DLC listed, so it won't qualify under utility rebate programs that require DesignLights Consortium listing. If a rebate is driving the purchase on a commercial retrofit, verify the program's qualified products list before committing to a bulk order of these.
How fast can I get the Satco Lighting S12420 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S12420 come with a warranty?
Absolutely. The Satco Lighting S12420 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S12420?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S12420 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.