SATCO Lighting S13107 25W LED A23 Hi-Pro HID Replacement, 6500K, Mogul extended Base, 120-277V

The S13107 uses a mogul extended base, which is the large screw base found in HID fixtures, so it threads into an existing mogul socket. The extended neck means it seats deeper than a standard mogul lamp, so check that the fixture or enclosure has the clearance for the longer lamp before you swap a whole building's worth.

It runs on 120-277 volt, so the same lamp works on 120V house circuits and on 277V commercial lighting circuits. That is a ballast-bypass lamp: the driver is in the lamp, so the existing HID ballast has to come out of the circuit and the socket wired direct to line voltage.

6500K is daylight white, the bluest end of the common range, and it will not match 3000K warm white or 4000K neutral lamps in adjacent fixtures. If you are relamping a parking structure, warehouse aisle, or security area where everything is being changed at once, 6500K reads clean and bright. If you are spot-replacing lamps in a space already running warmer color, expect a visible difference.

The lamp draws 25 watts. It is sold as an HID replacement, so it goes in place of a metal halide or high pressure sodium lamp that was pulling several times that at the socket, plus the ballast draw you remove when you bypass. For a property manager relamping a fleet of fixtures, the connected load per fixture drops to 25 watts on either 120V or 277V.

Yes, for this style of lamp. A line-voltage LED like the S13107 is rated 120-277V direct and carries its own driver, so the HID ballast and igniter get removed or wired out and the socket fed straight from line. That is electrician work in most jurisdictions. The alternative type is a ballast-compatible (plug and play) LED that drops into a live ballast with no rewiring, which costs more per lamp but keeps the labor down; it also leaves the ballast in place as a future failure point.

Frost. The A23 glass is frosted, which diffuses the LED sources rather than showing them as points, so it is the better choice in open fixtures, wall packs with clear lenses, and anywhere the lamp is in view.

Order it as Satco S13107. That number covers the 25W LED A23 in frost, 6500K, mogul extended base, 120-277V. Satco builds several wattages and color temperatures in the Hi-Pro A23 family, so the full number matters when you are matching lamps already in the building.