SATCO Lighting S13123 54W LED ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$87.70
Satco Lighting SAT-S13123 54 Watt LED HID Replacement - 5000K - Mogul extended base - Type B Ballast Bypass -277-480 Volt

SATCO Lighting S13123 54W LED HID Replacement, 5000K, Mogul extended Base, Type B Ballast Bypass -277-480V

(No reviews yet) Write a Review

Model: S13123
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$87.70
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S13123 54W LED HID Replacement, 5000K, Mogul extended Base, Type B Ballast Bypass -277-480V

54 Watt LED HID Replacement - 5000K - Mogul extended base - Type B Ballast Bypass -277-480 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.195-0.113A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White/Grey
Lamp Filament:
LED
Lamp Shape:
Corncob
Lens Finish:
Clear
Lens Material:
Polycarbonate (PC)
Lensed:
Yes
Lumens:
8100L
Operating Frequency:
50/60Hz
Product Type:
LED
Three-Way:
No
Warranty:
5 Year Limited - Hi-Pro
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Mogul Extended
Base Material:
Aluminum / Polycarbonate (PC)
Incandescent Equivalent:
250W
Location Rating:
Damp
CRI:
80
Subcategory:
LED
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
277V-480V
Beam Spread Angle:
360
Light Temperature:
5000K
Product Category:
Light Bulbs
Product Wattage:
54W
Product Material:
Aluminum / Polycarbonate (PC)
Product Weight:
1.74 lb

Satco Lighting S13123 – Frequently Asked Questions

1) Can I put the Satco S13123 corncob LED into an existing HID fixture without rewiring?
No. The S13123 is a Type B ballast bypass lamp, which means the existing HID ballast has to be removed and line voltage wired directly to the socket. It will not operate on a metal halide or HPS ballast. Budget the labor for a ballast removal on every fixture you convert.
2) Will a 277-480V LED corncob lamp work on a standard 120V circuit?
No. This 54W Satco corncob is built for 277V to 480V service only, at 50/60Hz. On a 120V branch circuit it will not light. High voltage retrofits like this are typical of warehouse, parking garage, and industrial high bay gear running 277 or 480 volt. If your fixtures are 120-277V, you need the line voltage version instead.
3) Does a mogul extended base LED bulb fit a standard mogul E39 socket?
The S13123 uses a mogul extended base, which threads into a mogul socket but sits the lamp body further out of the socket than a standard mogul lamp. That extra length matters in shallow or tight HID housings and in fixtures with a narrow neck. Measure the internal clearance of the housing before converting a whole building.
4) What HID wattage does this 54W LED corncob actually replace?
It is sold as a 250W equivalent, putting out 8100 lumens at 5000K with 80 CRI. So you are dropping from 250 watts of HID draw to 54 watts, and you get full output instantly with no warm-up or restrike delay that HID lamps have.
5) Can this LED corncob go inside a closed acorn or wallpack fixture?
Yes, it is an enclosed rated lamp, so a sealed acorn, jelly jar, or glass-lensed wallpack is fine. Location rating is damp, which covers covered walkways, parking structures, and canopies. It is not rated for direct exposure in a wet location.
6) Can I mount this corncob lamp base-up in a high bay, or does it have to hang down?
Burning position is universal, so base-up in a high bay, base-down in a post top, or horizontal in a wallpack all work. The 360 degree beam spread means light goes all the way around the lamp body, which suits open reflector HID housings; in a fixture with a tight optical cavity some of that output gets trapped.
7) Can these be put on a dimmer or an occupancy sensor dimming control?
No dimming. The 54W Satco HID replacement is non-dimmable and not three-way, so it runs at full output only. On a dimming circuit you will get flicker or no start. On/off occupancy switching is fine; step dimming is not.
8) Does the Satco S13123 qualify for a DLC utility rebate?
It is not DLC listed, so it will not qualify for the utility rebate programs that require a DLC Qualified Products List entry. It is Title 24 compliant and FCC compliant. If the rebate is driving the project, you need a DLC listed lamp or fixture instead.
9) How much current will each of these draw so I can size the circuit for a warehouse retrofit?
Draw runs 0.195A at the low end of the voltage range down to 0.113A at the high end, since current falls as voltage rises for a fixed 54 watt load. On a 480V feed figure roughly 0.113A per lamp when you total up a run of fixtures.
10) How long do these last compared to the metal halide lamps I keep relamping?
Rated life is 50,000 hours. For a property running lights 12 hours a day that is over 11 years before rated end of life, versus the repeated relamping and lumen depreciation of HID. The relamping labor saved is usually the bigger number on a parking garage or high bay.
11) Is 5000K going to look different from the metal halide lamps on the rest of my site?
5000K is a cool, daylight-white tone, close to what most metal halide reads as, so mixing it alongside existing MH on a site usually looks consistent. It is a fixed color temperature, not CCT selectable, so every lamp in the order will match. Next to high pressure sodium it will look noticeably whiter.
12) What is this lamp made of and will it hold up in a hot fixture?
The base and body use aluminum with polycarbonate, aluminum being the heat sink that carries heat away from the LEDs, and the lens is clear polycarbonate rather than glass. Housing color is white and grey. Aluminum construction plus the enclosed fixture rating is what lets it run in a closed HID housing.
How fast can I get the Satco Lighting S13123 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S13123 come with a warranty?
Absolutely. The Satco Lighting S13123 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S13123?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S13123 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!