SATCO Lighting S49394 54W LED ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$81.68
Satco Lighting SAT-S49394 54 Watt LED HID Replacement - 5000K - Extended Mogul base - Type B Ballast Bypass - Economy Hi-Pro

SATCO Lighting S49394 54W LED HID Replacement, 5000K, Extended Mogul Base, Type B Ballast Bypass, Economy Hi-Pro

(No reviews yet) Write a Review

Model: S49394
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$81.68
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S49394 54W LED HID Replacement, 5000K, Extended Mogul Base, Type B Ballast Bypass, Economy Hi-Pro

54 Watt LED HID Replacement - 5000K - Extended Mogul base - Type B Ballast Bypass - Economy Hi-Pro

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.540-0.195A
Avg Rated Hours:
35000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Filament:
LED
Lamp Shape:
Corncob
Lens Finish:
Clear
Lens Material:
Polycarbonate (PC)
Lumens:
7452L
Operating Frequency:
50/60Hz
Product Type:
LED HID
Three-Way:
No
Warranty:
3 Year Limited - Hi-Pro
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Bulb Base:
Mogul Extended
Base Material:
Aluminum / Polycarbonate (PC)
Incandescent Equivalent:
200W
Location Rating:
Damp
CRI:
80
Subcategory:
LED
Location Indoor/ Outdoor:
Indoor/Outdoor
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
100V-277V
Beam Spread Angle:
300
Light Temperature:
5000K
Product Category:
Light Bulbs
Product Wattage:
54W
Product Weight:
1.9 lb
Product Material:
Aluminum / Polycarbonate (PC)

Satco Lighting S49394 – Frequently Asked Questions

1) Do I need to remove the existing ballast to install the Satco S49394 54W LED corncob lamp?
Yes. The S49394 is a Type B ballast bypass lamp, so the existing HID ballast has to be removed or bypassed and line voltage wired directly to the socket. It runs on 100V to 277V at 50/60Hz, so it works on both 120V and 277V circuits once the ballast is out of the path. Leaving the ballast in line will damage the lamp.
2) What HID wattage does this 54W Satco LED corncob actually replace?
At 7,452 lumens it is aimed at replacing metal halide and HPS lamps in the 175W to 250W class, and Satco lists it as a 200W incandescent equivalent. Compare delivered lumens rather than watts, since an aged HID lamp may already be putting out far less than its rating.
3) Can I use this lamp in an enclosed fixture like a wall pack or acorn?
Yes, it is an enclosed rated lamp, so a sealed or gasketed fixture is fine. It is rated for damp locations indoor or outdoor, which covers a covered wall pack, canopy, or parking garage, but not a wet location with direct water exposure.
4) Will this Satco LED HID lamp qualify for a DLC utility rebate?
No. The S49394 is not DLC listed, so it will not clear utility programs that require a DLC qualified product. It is Title 24 compliant and FCC compliant. If the rebate is driving the project, you need a DLC listed lamp or fixture instead.
5) Does it matter if the fixture is base-up, base-down, or horizontal?
No. Burning position is universal, so the corncob body can run base up in a high bay, base down in a shoebox, or horizontal in a wall pack. The 300 degree beam spread means the light goes nearly all the way around the lamp, so in a base-up fixture you are relying on the reflector to push output down.
6) Can the Satco S49394 be put on a dimmer or occupancy sensor dimming control?
It is not dimmable. On a dimming circuit expect flicker or failure, so use straight switched or relay control. For sensor-based savings you need a switching sensor, not a 0-10V dimming one.
7) Is this 5000K lamp going to match the other fixtures in my warehouse?
It is a fixed 5000K daylight color with 80 CRI, and it is not CCT selectable, so what you order is what you get. If the rest of the building is on 4000K, retrofitting a few bays with this lamp will read noticeably bluer. Standardize a whole area at a time.
8) How many of these can I put on a 20 amp 277V branch circuit?
Draw is 0.540A at the low end of the voltage range down to 0.195A at 277V, at 54 watts. Size your circuits off the 277V figure if that is your service, and keep the continuous load at 80 percent of breaker rating per normal practice.
How fast can I get the Satco Lighting S49394 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S49394 come with a warranty?
Absolutely. The Satco Lighting S49394 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S49394?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S49394 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!