SATCO Lighting S49396 100W LED HID Replacement, 5000K, Extended Mogul Base, Type B Ballast Bypass, Economy Hi-Pro

Yes. The S49396 is a Type B ballast bypass lamp, so the existing HID ballast has to be removed or bypassed and line voltage wired direct to the socket. It accepts 100V to 277V at 50/60Hz, so it works on 120V, 208V, 240V and 277V circuits once the ballast is out of the loop. If you want a lamp that runs on the existing ballast, you need a Type A lamp instead, not this one.

The S49396 puts out 13,800 lumens at 100 watts and is rated as a 400W incandescent equivalent, which is the range metal halide and high pressure sodium retrofits typically target in warehouse and parking garage fixtures. Draw is 1.000 to 0.361A depending on supply voltage.

Yes, it is an enclosed rated lamp, so sealed acorn, wall pack and shoebox housings are fair game. Location rating is damp, so outdoor use is fine inside a fixture that keeps water off it, but not in wet locations with direct exposure.

Burning position is base up or base down, so it works in a pendant high bay firing down and in a post top or wall pack firing up. With a 300 degree beam spread the light goes nearly all the way around the lamp, which suits open reflectors and glass globes rather than tight spot applications.

No. The S49396 is non-dimmable, and it is not CCT selectable or three-way either. It runs at a fixed 5000K daylight output. If the fixture is on a dimmer or an occupancy sensor that dims rather than switches, this is the wrong lamp.

At 5000K this is a daylight white, the cool crisp look most commonly specified for garages, warehouses and exterior security lighting. It reads noticeably bluer than 4000K and much bluer than the orange of the high pressure sodium it often replaces, so if you are relamping in stages expect a visible difference until the whole area is done. CRI is 80.

It is not DLC listed, which is what most utility prescriptive rebate programs require, so plan on no rebate for this lamp. It is FCC compliant and Title 24 compliant.

Rated life is 35,000 hours. The lamp weighs 3.53 lb, with an aluminum and polycarbonate body and a clear polycarbonate lens, so on an aging porcelain mogul socket it is worth inspecting the socket and leads while you have the fixture open.