SATCO Lighting S28717 120W LED...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$225.21
Satco Lighting SAT-S28717 120 Watt LED HID Replacement - 5000K - Mogul extended base - Type B Ballast Bypass -277-347 Volt

SATCO Lighting S28717 120W LED HID Replacement, 5000K, Mogul extended Base, Type B Ballast Bypass -277-347V

(No reviews yet) Write a Review

Model: S28717
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$225.21
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S28717 120W LED HID Replacement, 5000K, Mogul extended Base, Type B Ballast Bypass -277-347V

120 Watt LED HID Replacement - 5000K - Mogul extended base - Type B Ballast Bypass -277-347 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Product Weight:
3.9 lb
Lumens:
16000L
Dimmable:
Non-Dimmable
Product Material:
Aluminum / Plastic
CRI:
80+

Satco Lighting S28717 – Frequently Asked Questions

1) Does the Satco S28717 LED HID replacement need the existing ballast removed?
Yes. The S28717 is a Type B ballast bypass lamp, which means it runs on line voltage direct to the socket. The existing HID ballast has to be removed or bypassed and the socket wired direct, with line to one socket lead and neutral to the other. Leave the ballast in the circuit and the lamp will not operate correctly.
2) Will the Satco S28717 work on 277V or 347V power?
It's built for the high-voltage range, 277 to 347 volts. That covers 277V commercial lighting circuits and 347V Canadian service. It is not a 120-277V lamp, so do not install it on a 120V or 208V circuit.
3) Will the Satco S28717 fit a standard mogul E39 socket?
It uses a mogul extended base, which seats in a mogul socket but sits deeper than a standard mogul lamp. In enclosed shoebox, high bay, and wall pack housings with a recessed socket, check that there is clearance for the extended neck and that the lamp body clears the reflector and lens before ordering a quantity.
4) Can the Satco S28717 be put on a dimmer or a step-dim control?
No. The S28717 is non-dimmable. On a dimmer or bi-level step-dim control you will get flicker, buzz, or no start at all. If the fixture is on a dimming system, the lamp needs to be fed a steady line-voltage circuit, or you need a dimmable fixture retrofit instead.
5) What HID wattage does a 120W LED mogul base retrofit replace?
At 120 watts drawing 16,000 lumens, the S28717 is sized as a replacement for metal halide and high pressure sodium lamps in the 320 to 400 watt class, which is the usual swap for a lamp in this output range. Compare your existing lamp's rated lumens rather than its wattage, since HID output drops substantially over life.
6) How much does the Satco S28717 LED retrofit lamp weigh, and will the socket support it?
The lamp weighs 3.9 lb, with an aluminum and plastic body (the aluminum is the heat sink). That is a lot heavier than the HID lamp coming out, so in pendant or base-up sockets check the socket and its mounting are sound before hanging it. Weak or heat-aged porcelain sockets are worth replacing at the same time.
7) What do I need to order alongside the S28717 to complete a ballast bypass retrofit?
The lamp itself is a clear-finish single item, so plan on the wiring parts: wire nuts or in-line connectors to cap off the removed ballast leads, a new porcelain mogul socket if the existing one is heat damaged, and a bypass label for the fixture so the next tech knows line voltage is at the socket. No ballast or driver is needed.
8) Is 5000K too cool for a parking garage or warehouse retrofit?
5000K reads as a crisp white and is the common choice for parking structures, warehouses, and exterior area lighting where visibility matters more than warmth. With 80+ CRI color rendering, it is fine for general industrial and MRO work. If the site already runs 4000K lamps, mixing in 5000K will be visibly noticeable across adjacent fixtures.
How fast can I get the Satco Lighting S28717 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28717 come with a warranty?
Absolutely. The Satco Lighting S28717 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28717?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28717 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!