SATCO Lighting S23114 130W, LE...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$88.77
Satco Lighting SAT-S23114 130 Watt - LED HID Replacement - 4000K - Mogul extended base - Type B Ballast Bypass - 120-277 Volt - Dimmable

SATCO Lighting S23114 130W, LED HID Replacement, 4000K, Mogul extended Base, Type B Ballast Bypass, 120-277V, Dimmable

(No reviews yet) Write a Review

Model: S23114
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$88.77
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S23114 130W, LED HID Replacement, 4000K, Mogul extended Base, Type B Ballast Bypass, 120-277V, Dimmable

130 Watt - LED HID Replacement - 4000K - Mogul extended base - Type B Ballast Bypass - 120-277 Volt - Dimmable

Manufacturer Resources

Spec Sheet

Product Specs

Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Product Material:
Aluminum
Surge Protection:
Built-in surge protection - 6KV
Product Weight:
2.98 lb
CRI:
80+
Dimmable:
Yes-Dimmable
Lumens:
16300L

Satco Lighting S23114 – Frequently Asked Questions

1) Does the Satco S23114 LED HID replacement need the existing ballast removed?
Yes. The S23114 is a Type B ballast bypass lamp, which means the existing HID ballast has to be removed or bypassed and line voltage wired directly to the socket. It runs on 120-277V. If you leave the ballast in circuit the lamp will not operate correctly, so plan on an electrician opening the fixture before installing.
2) What HID wattage does this 130W Satco LED actually replace?
At 16,300 lumens, the 130W S23114 is aimed at replacing 320W to 400W metal halide in high bays, wall packs and area fixtures, where the original lamp has degraded well below its initial output. Color is 4000K neutral white with 80+ CRI, so it reads cooler and cleaner than an aged MH lamp.
3) Can I put these Satco LED HID replacements on a dimmer?
The S23114 is dimmable. Because it is a ballast bypass lamp wired straight to line voltage, the dimming is done by a line voltage dimmer rated for the load on the circuit, not by a ballast or driver control. On 277V circuits make sure the dimmer is rated for 277V.
4) Is this LED lamp protected against surges on a parking lot or warehouse circuit?
Built-in surge protection rated 6kV is included on the S23114. For exterior pole and parking lot circuits that see switching and lightning transients, that is the spec to look for, though it is no substitute for a panel-level SPD on a large site.
5) Will 4000K match the other lamps I already have in the building?
The S23114 is 4000K neutral white with 80+ CRI. If your facility has been standardizing on 5000K daylight lamps, this one will look visibly warmer side by side, so order to match whichever color temperature is already in the space rather than mixing them in the same room.
6) Is the Satco S23114 an enclosed-fixture or open-fixture lamp, and what is the housing made of?
The lamp body is aluminum, which is what carries heat away from the LEDs, and the lens is translucent white for diffused output. Heat management matters on an HID retrofit: keep the aluminum body clear of insulation or packed-in reflector contact so it can shed heat.
7) Where do I get the full photometric data for Satco S23114 for a lighting submittal?
Satco publishes a spec sheet PDF for the S23114 covering the lamp's published performance data. For a submittal package, cite the manufacturer part number S23114 along with the headline figures: 130W, 16,300 lumens, 4000K, 80+ CRI, 120-277V.
How fast can I get the Satco Lighting S23114 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S23114 come with a warranty?
Absolutely. The Satco Lighting S23114 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S23114?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S23114 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!