SATCO Lighting S28692 13W T5 L...
In stock
$16.09

SATCO Lighting S28692 13W T5 LED, Miniature bi-pin Base, 5000K, 50000 Avg Rated Hours, 1700 Lumens, Type B, Ballast Bypass

(No reviews yet) Write a Review

Model: S28692
Selected Finish is

In stock

$16.09
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S28692 13W T5 LED, Miniature bi-pin Base, 5000K, 50000 Avg Rated Hours, 1700 Lumens, Type B, Ballast Bypass

13 Watt T5 LED - Miniature bi-pin base - 5000K - 50000 Average rated hours - 1700 Lumens - 120-277 Volt - Type B - Ballast Bypass - Single or Double Ended Wiring

Manufacturer Resources

Product Specs

Amps:
0.108-0.047A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CCT Selectable:
No
DLC Approved:
Yes
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Filament:
LED
Lamp Shape:
T5
Lens Finish:
Frost
Lens Material:
Glass
Lensed:
Yes
Lumens:
1700L
Operating Frequency:
50/60Hz
Product Type:
Tube
Three-Way:
No
Warranty:
5 Year Limited - T5 LED Bulbs - Ballast Bypass
Product Group:
Lighting
Product Subgroup:
Lamps & Bulbs
Bulb Base:
Miniature Bi Pin
Base Material:
Glass
Incandescent Equivalent:
50W
Location Rating:
Damp
CRI:
83
Subcategory:
LED
Title 24 Compliant:
Yes
Bulb Type:
LED
Product Voltage:
120V-277V
Beam Spread Angle:
240
Light Temperature:
5000K
Product Category:
Light Bulbs
Product Wattage:
13W
Department:
Electrical

Satco Lighting S28692 – Frequently Asked Questions

1) Can I put the Satco S28692 T5 LED into my existing fluorescent fixture without rewiring it?
No. The S28692 is a Type B ballast bypass lamp, so the fluorescent ballast has to come out and line voltage must be wired directly to the sockets. It accepts 120V to 277V at 50/60Hz. If you want a lamp that drops into the existing ballast with no wiring work, you need a Type A (plug-and-play) T5 instead.
2) Does the S28692 work with single-ended or double-ended wiring?
Both. The 13W T5 LED is listed for single or double ended wiring, so an electrician can bring line and neutral to one end or split them across both ends depending on how the fixture tombstones are set up. Confirm which scheme you are using before you energize, since the non-powered end must be isolated correctly.
3) Can this T5 LED tube go in an enclosed or damp location fixture?
Yes on both counts. The S28692 is an enclosed rated lamp, so it can be installed in a sealed or gasketed fixture without voiding its thermal rating, and it carries a Damp location rating. Damp covers covered exterior soffits, parking garages and wash-down adjacent areas, but not direct water exposure, which would require a wet rating.
4) Is the Satco S28692 DLC listed for utility rebates and does it meet Title 24?
Yes to both. The 13W T5 LED is DLC approved, which is what most utility prescriptive rebate programs require, and it is Title 24 compliant for California projects. It is also FCC compliant, which matters where lamp EMI near sensitive equipment is a concern.
5) Will this lamp match the other tubes in my building, or will it look different?
The S28692 is a fixed 5000K daylight tube with a CRI of 83 and a frosted glass lens, and it is not CCT selectable. If the rest of your fixtures are running 3500K or 4000K lamps, this one will read noticeably cooler and bluer next to them. For a consistent look across a floor, standardize every fixture on one color temperature.
6) What base does the Satco S28692 use, and will it fit my existing T5 sockets?
It uses a miniature bi-pin base, the standard pin configuration on T5 linear lamps, so it seats in existing T5 tombstones. The limiting factor is not the base but the wiring: because this is a ballast bypass lamp, those sockets must be fed line voltage, and shunted sockets may need to be swapped to non-shunted depending on the wiring scheme you use.
7) Will a 13W LED T5 be bright enough to replace the 14W fluorescent tubes in my shop fixtures?
The S28692 puts out 1700 lumens at 13 watts, which Satco rates as a 50W incandescent equivalent, with a 240 degree beam spread so light wraps the tube rather than firing one direction. For a linear fixture that was running T5 fluorescent, output is in the same range while drawing 0.108 to 0.047A depending on supply voltage.
8) Can I put the S28692 on a dimmer or a three-way circuit?
No. The 13W T5 LED is not a three-way lamp, and it is a ballast bypass tube fed straight line voltage from 120V to 277V, so it should be switched, not dimmed. Put it on a standard on/off circuit or an occupancy sensor rather than a phase-cut dimmer.
9) Is the Satco S28692 glass or plastic?
Glass. Both the lens and the base material are glass with a frosted finish and a white housing. That matters for two reasons: handle it like a lamp rather than a shatter-resistant plastic tube, and for areas needing breakage protection, specify a coated or plastic-bodied LED tube instead.
How fast can I get the Satco Lighting S28692 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28692 come with a warranty?
Absolutely. The Satco Lighting S28692 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28692?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28692 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.