SATCO Lighting S28728 6W LED P...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$10.93
Satco Lighting SAT-S28728 6 Watt LED PL 2-PIN - 4000K - 600 Lumens - GX23 base - 50000 Average rated hours - 360 deg. Beam Angle - 120-277 Volt - Type B - Ballast Bypass

SATCO Lighting S28728 6W LED PL 2-PIN, 4000K, 600 Lumens, GX23 Base, 50000 Avg Rated Hours, 360 degree Beam Angle, Type B, Ballast Bypass

(No reviews yet) Write a Review

Model: S28728
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$10.93
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S28728 6W LED PL 2-PIN, 4000K, 600 Lumens, GX23 Base, 50000 Avg Rated Hours, 360 degree Beam Angle, Type B, Ballast Bypass

6 Watt LED PL 2-PIN - 4000K - 600 Lumens - GX23 base - 50000 Average rated hours - 360 deg. Beam Angle - 120-277 Volt - Type B - Ballast Bypass

Manufacturer Resources

Spec Sheet

Product Specs

Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Product Weight:
0.11 lb
Dimmable:
Non-Dimmable
Lumens:
600L
CRI:
80+
Product Material:
Plastic
Country of Origin:
Vietnam
Surge Protection:
Built-in-surge protection - 0.5KV

Satco Lighting S28728 – Frequently Asked Questions

1) Do I have to remove the ballast to install the Satco S28728 LED PL lamp?
Yes. The S28728 is a Type B ballast bypass lamp, so it runs on line voltage direct to the socket and the existing CFL ballast has to be removed or bypassed first. Leaving the ballast in circuit is not a valid install for this lamp. The wiring accepts 120-277 volts, so it works on both 120V and 277V commercial circuits once the fixture is rewired.
2) Will a GX23 2-pin LED lamp fit my existing 2-pin CFL socket?
The S28728 uses a GX23 2-pin base, so it seats in a GX23 socket only. Two-pin CFL sockets come in several bases (GX23, G24d, GX32d among them) and they are not interchangeable, so check the pin base stamped on the old lamp or socket before ordering. If your fixture uses a 4-pin base, this lamp will not fit.
3) What CFL wattage does the 6W Satco S28728 replace?
At 600 lumens, the 6 watt S28728 covers the light output range of a typical 13 watt GX23 twin-tube CFL while drawing well under half the power. Output, not wattage, is the number to match when you are swapping fixtures across a building.
4) Is 4000K the right color for standardizing corridor and stairwell fixtures?
4000K is neutral white, the color most commonly specified for corridors, stairwells, restrooms, and back-of-house areas in commercial and multi-family buildings. It reads cooler and cleaner than 3000K warm white and warmer than 5000K daylight. If the rest of your building is already on 4000K lamps, the S28728 will match.
5) Will this LED PL lamp light the whole fixture like the CFL it replaces?
The S28728 puts out a 360 degree beam, so it throws light all the way around the lamp the way a twin-tube CFL does rather than firing in one direction. That matters in wall sconces, drum fixtures, and open downlights where a directional LED would leave dark spots on the diffuser.
6) Can I use the S28728 on a 277 volt circuit without changing the lamp?
Yes. The same 6W lamp is rated 120-277 volt, so one part number covers both the 120V circuits in residential and tenant spaces and the 277V circuits common in commercial buildings. That lets a facility carry a single lamp on the shelf for both.
7) How long will the Satco S28728 last in a 24/7 stairwell or corridor?
Rated at 50,000 average hours. Run continuously that works out to roughly 5.7 years of nonstop operation, which is why these get spec'd in always-on areas where relamping means a lift and a labor ticket.
8) What finish does the Satco S28728 LED PL lamp come in?
Frost only. The frosted lens diffuses the LED sources so you do not see bright dots through a clear fixture lens, which is the usual complaint when swapping a CFL for an LED in an open or lightly diffused housing.
How fast can I get the Satco Lighting S28728 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S28728 come with a warranty?
Absolutely. The Satco Lighting S28728 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S28728?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S28728 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!