You may also like
SATCO Lighting S29004 3W, R12 LED, 3000K, Bayonet Single Contact Base, 12V
3 Watt - R12 LED - 3000K - Bayonet Single Contact Base - 12 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Dimmable:
- Non-Dimmable
- Product Material:
- Aluminum / Polycarbonate (PC)
- CRI:
- 80+
- Product Weight:
- 0.06 lb
- Lumens:
- 220L
Satco Lighting S29004 – Frequently Asked Questions
1) Will the Satco S29004 LED bulb run on a 12 volt system?
Yes. The S29004 is a 12 volt lamp, so it belongs on a low voltage circuit (landscape, marine, RV, or transformer fed track). It will not work wired straight to 120V line voltage.
2) What base does the S29004 R12 LED use, and will it fit my screw-in socket?
It uses a bayonet single contact (BA15s style) base, which pushes in and twists to lock. It will not thread into an Edison screw socket. Confirm your fixture has a bayonet single contact holder before ordering.
3) Is the Satco S29004 the right replacement for a 12V R12 incandescent bulb?
It is an LED R12 in the same 12 volt, bayonet single contact configuration, so it drops into a fixture built for a low voltage R12 bayonet lamp. Match the base type and voltage in the fixture you are replacing and the swap is direct.
4) What color light does the Satco 3000K R12 LED give off?
3000K, a warm white. It reads warmer and yellower than a 4000K neutral lamp and closer to the tone of an incandescent, which is why it is the usual pick when you are swapping low voltage lamps and want the light to match the rest of a space.
5) How much power does the S29004 draw per lamp for sizing a low voltage transformer?
3 watts per lamp at 12 volts. Add 3W for every lamp on the run when you total the load against your transformer rating, and remember LEDs draw far less than the incandescent R12 lamps a legacy transformer was likely sized for, so an existing transformer is usually oversized rather than short.
6) What is the Satco part number I should order for this 3W 12V R12 LED?
Order Satco S29004. That is the manufacturer part number for the 3 watt R12 LED, 3000K, bayonet single contact base, 12 volt lamp.
How fast can I get the Satco Lighting S29004 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29004 come with a warranty?
Absolutely. The Satco Lighting S29004 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29004?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29004 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.