You may also like
SATCO Lighting S22216 11.5W PAR38 LED, 90 CRI, 3000K, 40 degree Beam Angle, Medium Base, 120V
Model: SATCO-S22216
SATCO Lighting S22216 11.5W PAR38 LED, 90 CRI, 3000K, 40 degree Beam Angle, Medium Base, 120V11.5 Watt PAR38 LED - 90 CRI - 3000K - 40 deg. Beam Angle - Medium base - 120 Volt
Satco Lighting
$8.95
SATCO Lighting S29455 17.5W, PAR38 LED, 3000K, 40 degree Beam Angle, Medium Base, 120V
17.5 Watt - PAR38 LED - 3000K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Product Specs
- Amps:
- 0.146A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR38
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 1400L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 100W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 17.5W
Satco Lighting S29455 – Frequently Asked Questions
1) Is this PAR38 LED safe to use in an airtight or fully enclosed fixture?
Yes, it's an enclosed rated lamp, so sealed and airtight fixtures are fine. A lot of PAR38 LEDs are not, and running a non-enclosed-rated lamp in a sealed can cooks the driver and kills it early. This one is also rated for wet locations and listed for both indoor and outdoor use, which covers soffit cans and exterior floods.
2) Will the Satco S29455 work on a dimmer?
It's a dimmable lamp on 120V, 60Hz. Performance depends on the dimmer being LED-compatible and on how many lamps share the circuit; a legacy incandescent dimmer with a high minimum load can cause flicker or a limited dim range with a single 17.5W lamp.
3) How many of these PAR38 lamps can I put on a 20 amp circuit?
Each lamp draws 0.146A at 120V. That's a very low load per fixture compared to the 0.83A a 100W incandescent would pull, so retrofitting an existing halogen track or can circuit leaves you with substantial headroom. Size the total against the circuit and any dimmer or relay rating rather than the lamp itself.
4) Is the Satco S29455 warm enough for a hotel lobby or apartment common area?
At 3000K it's a warm white, a little crisper than the 2700K of a standard incandescent but still on the warm side of neutral. CRI is 90, so skin tones, wood finishes, and fabrics render accurately, which is why 3000K/90 CRI is a common spec for hospitality and multi-family common areas. It's a fixed color temperature, not tunable.
5) Does this Satco PAR38 meet California Title 24?
Yes, the S29455 is California T24 listed. It is not DLC approved, so if a utility rebate program you're filing under requires a DLC listing, this lamp won't qualify for it. It is FCC compliant.
6) Can this lamp be mounted base-up or pointed sideways in a track head?
Burning position is universal, so base-up in a recessed can, base-down in a pendant, or horizontal in a track head or wall-mounted flood all work. No orientation restriction to plan around.
7) What is the rated life on the Satco S29455 and does it hold up outdoors?
Rated at 25,000 average hours. On a 12 hour per day exterior schedule that's roughly 5.7 years of service. The lamp carries a wet location rating with a clear thermoplastic (PBT) lens and a plastic base in a silver housing, so exposed soffit, canopy, and landscape flood positions are within spec.
8) Will this PAR38 LED work in a three-way lamp socket?
No. The S29455 is not a three-way lamp. Screwed into a three-way socket it will run at a single output level regardless of switch position, and some three-way sockets won't energize it reliably. For stepped output you need a lamp specifically built as three-way.
How fast can I get the Satco Lighting S29455 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29455 come with a warranty?
Absolutely. The Satco Lighting S29455 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29455?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29455 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.