SATCO Lighting S29912 25W T5 LED, Miniature bi-pin Base, 3500K, 50000 Avg Rated Hours, 3500 Lumens, Type A, Ballast dependent
25 Watt T5 LED - Miniature bi-pin base - 3500K - 50000 Average rated hours - 3500 Lumens - Type A - Ballast dependent
Manufacturer Resources
Product Specs
- Product Group:
- Lighting
- Product Subgroup:
- Lamps & Bulbs
- Department:
- Electrical
- Product Type:
- Tube
Satco Lighting S29912 – Frequently Asked Questions
1) Does the Satco S29912 T5 LED tube need the existing fluorescent ballast, or do I have to rewire the fixture?
Keep the ballast. The S29912 is a Type A, ballast dependent lamp, so it runs off the existing fluorescent ballast and drops into the sockets with no rewiring. If the ballast is already failing or you want it out of the maintenance picture, a Type A lamp is the wrong choice; you'd want a ballast bypass (Type B) tube instead.
2) Will 3500K on the Satco S29912 match the other tubes in my building?
The S29912 is 3500K, a neutral white that sits between 3000K warm and 4000K cool. If your other fixtures are running 4100K cool white fluorescents, the difference is visible side by side in the same room, so for a partial relamp in an open office or corridor plan on doing the whole run rather than mixing.
3) How much light does the Satco S29912 put out for 25 watts?
3500 lumens at 25 watts. That output is in the range of a 54W T5HO fluorescent, so in a high output T5 fixture it keeps the light level while cutting the lamp wattage roughly in half. Note that on a Type A lamp the ballast still draws its own power, so the fixture total is a bit above the lamp wattage.
4) Is the Satco S29912 a high output T5 replacement or a standard T5?
Its 25 watt draw and 3500 lumen output put it in T5HO territory, the lamp type used in high bay, grocery, and warehouse strip fixtures rather than standard 14W/28W T5 troffers. Because it is ballast dependent, the existing ballast in the fixture has to be the one it was built to run on, so confirm the fixture is an HO ballast before relamping.
5) How long does the Satco S29912 last compared to the fluorescent tube it replaces?
Rated at 50,000 average hours. For a property manager running 12 hours a day that is roughly 11 years of service, which is the main reason to convert: fewer lift rentals and fewer relamp trips. The ballast is still the wear item in a Type A install, so expect that to be the part you eventually replace.
6) What is the exact part number for the Satco 25W 3500K T5 LED tube?
Satco Lighting S29912. That number covers the 25 watt T5 LED with the miniature bi-pin base at 3500K, 3500 lumens, Type A ballast dependent. Satco uses separate S-numbers for each color temperature in this family, so quote S29912 specifically if you need 3500K.
How fast can I get the Satco Lighting S29912 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29912 come with a warranty?
Absolutely. The Satco Lighting S29912 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29912?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29912 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.