SATCO Lighting S39906 17W T8 L...
In stock
$7.83

SATCO Lighting S39906 17W T8 LED, 4Ft, 4000K, Medium Bi Pin Base, 50000 Avg Rated Hours, 2200 Lumens, Type B, Ballast Bypass

(No reviews yet) Write a Review

Model: S39906
Selected Finish is

In stock

$7.83
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

SATCO Lighting S39906 17W T8 LED, 4Ft, 4000K, Medium Bi Pin Base, 50000 Avg Rated Hours, 2200 Lumens, Type B, Ballast Bypass

17 Watt T8 LED - 4Ft - 4000K - Medium Bi Pin base - 50000 Average rated hours - 2200 Lumens - Type B - Ballast Bypass - Single or Double Ended Wiring

Manufacturer Resources

Product Specs

Amps:
0.142-0.061A
Avg Rated Hours:
50000
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CA Web Text:
Lawful for sale
CCT Selectable:
No
CRI:
82
DLC Approved:
Yes
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Medium Bi Pin
Lamp Filament:
LED
Lamp Shape:
T8
Lens Finish:
Gloss White
Lens Material:
Glass
Lumens:
2200L
Operating Frequency:
50/60Hz
Product Type:
Tube
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - T8 LED Bulbs - Ballast Bypass
Product Group:
Lighting
Product Subgroup:
Lamps & Bulbs
Incandescent Equivalent:
90W
Location Rating:
Damp
Base Material:
Glass
Location Indoor/ Outdoor:
Indoor;Outdoor
Product Voltage:
120V-277V
Beam Spread Angle:
210
Light Temperature:
4000K
Product Category:
Light Bulbs
Product Wattage:
17W
Department:
Electrical

Satco Lighting S39906 – Frequently Asked Questions

1) Can I just drop the Satco S39906 T8 LED into my existing fluorescent fixture, or does the ballast have to go?
The ballast has to go. The S39906 is a Type B ballast bypass lamp, so the fixture's fluorescent ballast is removed and line voltage is wired directly to the sockets. There is no plug-and-play mode on this lamp. It accepts either single-ended or double-ended wiring, so it works with whichever socket arrangement you rewire to, and it runs on 120V through 277V at 50/60Hz. This is electrician work, and the fixture should be labeled as converted once it is done.
2) Will a 17W LED T8 at 2200 lumens be bright enough to replace my 32W F32T8 fluorescent tubes?
For most office, corridor, and back-of-house lighting, yes. The S39906 puts out 2200 lumens on 17 watts, which is roughly half the wattage of a standard 32W four-foot fluorescent. Satco rates it as a 90W incandescent equivalent. Where it may fall short is in older fixtures that were delivering high light levels from fresh high-output lamps, or in high-bay and task areas; in a 2x4 troffer with multiple lamps it is normally a straight swap. The 210 degree beam spread keeps the distribution wide, close to how a tube lights a room rather than throwing a narrow beam.
3) Does the Satco S39906 fit standard T8 bi-pin sockets in a four-foot fixture?
It does. The lamp is a four-foot T8 with a medium bi-pin base, the same lamp shape and base as a standard F32T8 fluorescent tube, so it seats in the existing tombstones. What changes is the wiring behind them, not the socket type, because the lamp is ballast bypass. Shunted sockets usually have to be swapped to non-shunted for single-ended wiring, so plan on checking the tombstones during the conversion.
4) Is 4000K the right color temperature to match the rest of my building's lighting?
The S39906 is fixed at 4000K, a neutral white that reads cooler than 3000K warm white and warmer than 5000K daylight. It is the usual choice for offices, schools, healthcare corridors, and parking structures. The color temperature is not selectable, so if your other fixtures are running 3500K or 5000K you will see the difference where the two meet. For a phased retrofit across a facility, pick one CCT and stay with it. Color rendering is 82 CRI.
5) Can this LED tube go in a damp area like a parking garage or covered walkway?
The S39906 carries a damp location rating and is listed for indoor and outdoor use, so a covered walkway, canopy, parking structure, or similar damp spot is within its rating, provided it is in a fixture suitable for that location. Damp is not wet, so it is not for direct rain exposure or anywhere water can hit the lamp. Burning position is universal, so it can be mounted horizontal, vertical, or upside down with no restriction.
6) How many circuit amps will a bank of these 17W LED tubes draw compared to fluorescent?
Each S39906 draws 0.142A at the low end of its voltage range down to 0.061A at the high end, running 120V to 277V. That lets you put considerably more lamps on a 20A branch circuit than the fluorescent ballasts you are removing, which is one reason retrofits often free up circuit capacity. Do the load math at the actual circuit voltage, since the amp draw drops as voltage rises.
7) Will the Satco S39906 work with my existing dimmers or occupancy sensors?
Treat it as a non-dimming lamp. The S39906 is a ballast bypass tube with no dimming capability stated and no three-way function, so putting it on a dimmer will give you flicker or no light at all. Line-voltage occupancy sensors and relays that switch the circuit fully on and off are a different matter and are generally fine, since the lamp simply sees 120V to 277V or nothing. If the space needs dimming, specify a dimmable LED tube or an LED-ready fixture with a dimming driver instead.
8) How long will these LED tubes last before my maintenance crew is back on a lift?
Average rated life on the S39906 is 50,000 hours. On a 12 hour per day, 5 day per week schedule that is roughly 16 years of service, so for a warehouse or corridor on a lift it meaningfully cuts relamping trips compared with fluorescent. Running 24/7 it works out to about 5.7 years.
9) Is the Satco S39906 a glass tube or plastic?
Glass. Both the lens and the base material are glass, with a gloss white lens finish and a white housing. Glass tubes handle heat well and look like the fluorescent lamp they replace, but they break like one too, so in gymnasiums, food areas, or anywhere impact is a concern a shatter-resistant coated or plastic-bodied lamp is the better call.
10) What part number do I order for a 4-foot 4000K Satco ballast bypass T8, and is there more than one version?
Order Satco S39906. It is a single configuration, 17W, 4000K, 2200 lumens, gloss white, medium bi-pin, and there are no size or color options to choose on it. If you need a different color temperature for the same fixture, that is a different Satco part number, not an option on this one, since the CCT is fixed.
How fast can I get the Satco Lighting S39906 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S39906 come with a warranty?
Absolutely. The Satco Lighting S39906 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S39906?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S39906 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.