You may also like
SATCO Lighting S7974 1.6W T5 LED, 5000K, 12V, Wedge Base, 120 Beam Angle
1.6 Watt T5 LED - 5000K - 12 Volt - Wedge Base - 120 Beam Angle
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Dimmable:
- Non-Dimmable
Satco Lighting S7974 – Frequently Asked Questions
1) Will the Satco S7974 LED bulb run on a standard 120V circuit?
No. The S7974 is a 12 volt lamp and needs a 12V supply, typically from a low voltage transformer or a 12V DC system. Wiring it directly to line voltage will destroy it. If your fixture is line voltage, you need a 120V lamp instead.
2) What base does the Satco S7974 T5 LED use, and does it screw in?
It uses a wedge base, so it pushes straight into the socket rather than screwing or twisting in. Pull the old wedge lamp straight out and press the new one in. It will not fit a candelabra or bayonet socket.
3) Can I use the Satco S7974 as a replacement for a 12V wedge base halogen or xenon lamp?
It is a 1.6 watt LED built on the same 12 volt wedge base format, so it drops into a 12V wedge socket. The draw is far lower than a halogen of the same base, which matters on two counts: a magnetic transformer may need a minimum load to operate correctly, and you can run more lamps on the same transformer before reaching its capacity.
4) What color light does the Satco S7974 1.6W LED give off?
5000K, which reads as a crisp daylight white rather than a warm yellow. If the surrounding lamps in a landscape run or display case are 2700K or 3000K, this one will look noticeably bluer next to them, so plan on changing the whole run if you care about matching.
5) How wide is the light spread on the Satco S7974 wedge base LED?
120 degree beam angle, so it throws a wide wash rather than a tight spot. That suits step lights, path lights, cabinet and display lighting where you want general fill. For a focused accent beam you would want a narrow beam lamp instead.
6) How much power does the Satco S7974 draw, and how many can I put on one 12V transformer?
Each lamp draws 1.6 watts. Divide your transformer's rated wattage by 1.6 and leave headroom, so a 60VA transformer supports a substantial run of these. The low draw is why facilities crews swap wedge halogens to this style on long low voltage circuits.
7) Is the Satco S7974 a T5 shape, and will it clear a tight fixture housing?
Yes, it is a T5 form factor, meaning a tubular envelope 5/8 inch in diameter, which is the standard slim wedge profile used in step lights, cabinet pucks and display fixtures. T5 designations are measured in eighths of an inch, so T5 equals 5/8 inch across.
8) Does the Satco S7974 come in more than one finish or color temperature?
It is sold in a single configuration: white finish, 5000K, 1.6W, 12V wedge base, under part number S7974. If you need a warmer color for the same socket, you would be ordering a different Satco part number, not an option on this one.
How fast can I get the Satco Lighting S7974 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S7974 come with a warranty?
Absolutely. The Satco Lighting S7974 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S7974?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S7974 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.