You may also like
SATCO Lighting S9547 1.6W, JCD LED, 5000K, G9 Base, 120V
1.6 Watt - JCD LED - 5000K - G9 base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.013A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED
- Lamp Shape:
- T4
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 200L
- Product Type:
- Miniature
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- G9 Double Loop
- Base Material:
- Silicon
- Incandescent Equivalent:
- 10W
- Location Rating:
- Damp
- CRI:
- 80
- Subcategory:
- LED
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 360
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 1.6W
- Product Material:
- Silicon
Satco Lighting S9547 – Frequently Asked Questions
1) Will the Satco S9547 G9 LED bulb fit my existing G9 socket?
Yes. The S9547 uses a G9 double loop base on 120 volt line voltage, so it drops straight into a standard G9 socket with no transformer or adapter. The base is silicon rather than ceramic, which is what you want in a tight fixture pocket where the pins get worked on service calls.
2) Can I use this G9 LED in a fully enclosed fixture?
Yes, it is an enclosed rated lamp, so sealed sconces, pendants with closed glass, and capped vanity fixtures are all fair game. It also carries a damp location rating, which covers covered porches and bathrooms, but not direct wet exposure.
3) Is the Satco S9547 G9 LED dimmable, and will it work on my existing dimmer?
The lamp is dimmable. At 1.6 watts and 0.013 amps draw it sits far below the minimum load most older incandescent style dimmers need, so a single lamp on a legacy dimmer will often flicker or refuse to start. Ganging several lamps on one circuit, or using a low load LED dimmer, is what makes it behave.
4) What incandescent G9 bulb does this 1.6W LED replace?
It replaces a 10 watt incandescent G9, putting out 200 lumens on 1.6 watts. If you are pulling out 25W or 40W halogen G9 capsules, this will be a noticeable step down in output, not a one for one swap.
5) Will 5000K match the other bulbs in my building?
5000K is a fixed daylight white, and it is not CCT selectable, so what you see is what you get. It will read distinctly cooler and bluer next to 2700K or 3000K warm white lamps. For corridors, laundry rooms, and back of house where daylight tone is already the standard, it matches; in guest rooms and lobbies running warm white it will stand out.
6) Can this bulb be mounted base up, base down, or sideways?
Burning position is universal, so base up, base down, and horizontal are all acceptable. That matters on G9 chandeliers and wall sconces where the sockets point in different directions on the same fixture.
7) Does this G9 LED throw light in all directions like a halogen capsule?
Close to it. The beam spread is 360 degrees and the lens is clear, so it fills a shade or diffuser evenly rather than spotlighting. That is the behavior you want in decorative sconces and pendants where a directional LED would leave dark patches.
8) Is this bulb acceptable for California Title 24 work?
Yes, the S9547 is Title 24 compliant, which is what a contractor needs on California residential and multi-family lighting scopes. Color rendering is 80 CRI at 25,000 average rated hours.
9) Is this the right bulb for a commercial rebate or DLC-based utility program?
No. The S9547 is not DLC approved, so it will not qualify under programs that require a DLC listing. It is a decorative miniature G9 lamp, and DLC listing generally applies to commercial fixtures and lamps outside this category. For relamping on its own merits it is fine, but budget it without the rebate.
10) What shape is this G9 LED and will it clear a small shade or a tight socket cup?
It is a T4 JCD shape, the same slim tubular capsule profile as the halogen G9 it replaces, with a clear lens. That keeps it inside the envelope of tight sconce cups and narrow chandelier candle covers where a bulbier LED retrofit will not seat.
How fast can I get the Satco Lighting S9547 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9547 come with a warranty?
Absolutely. The Satco Lighting S9547 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9547?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9547 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.