SATCO Lighting S8605 6.5W, LED MR16 LED, 3000K, 40 degree Beam Angle, GU5.3 Base, 12V AC/DC, Carded

It is a 50W halogen MR16 replacement, putting out 500 lumens on 6.5 watts at 0.542 amps. That drop in load matters if you are relamping a whole track run, since the existing transformer sees a fraction of the original draw.

Yes. It carries an enclosed rated lamp designation, so a sealed or gasketed recessed housing is acceptable. It is also damp location rated and listed for indoor use, which covers a covered porch ceiling or a bathroom, but not direct wet exposure.

The S8605 is a dimmable lamp. Because it runs on 12V AC/DC through a transformer, dimming performance depends on the transformer and dimmer pairing, not just the lamp. On a 60Hz supply with a compatible low-voltage dimmer and driver it will dim; a magnetic transformer on an old incandescent dimmer with a high minimum load may flicker at the bottom of the range.

3000K is warm white, the usual match for existing halogen and warm LED downlights in hospitality, residential and lobby spaces. It is a fixed color temperature, not a field-selectable CCT lamp, so every unit burns the same 3000K with 80 CRI. If your other openings run 2700K or 4000K, this will read visibly different side by side.

Burning position is universal, so base up in a recessed can, horizontal in a track head, or base down in a pendant are all fine. No orientation restriction to plan around when you standardize it across mixed fixture types.

It ships carded, one 6.5W gray-finish MR16 per card under MPN S8605. That suits over-the-counter resale and parts-room stocking; there is no bulk sleeve configuration on this item.