You may also like
SATCO Lighting S8612 4.5W ST19 LED, Amber, Medium Base, 2000K, 350 Lumens, 120V, Carded
4.5 Watt ST19 LED - Amber - Medium base - 2000K - 350 Lumens - 120 Volt - Carded
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.038A
- Avg Rated Hours:
- 15000
- Burning Position:
- Universal
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Lamp Filament:
- LED Filament
- Lamp Shape:
- ST19
- Lens Finish:
- Transparent Amber
- Lensed:
- Yes
- Lumens:
- 350L
- Operating Frequency:
- 60Hz
- Product Type:
- Candle
- Three-Way:
- No
- Warranty:
- 3 Year Limited
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Incandescent Equivalent:
- 40W
- Location Rating:
- Damp
- CRI:
- 80
- Subcategory:
- LED
- Title 24 Compliant:
- Yes
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 360
- Light Temperature:
- 2000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
Satco Lighting S8612 – Frequently Asked Questions
1) Will the Satco S8612 amber ST19 LED fit a standard E26 medium base socket?
Yes. The S8612 uses a medium base, which is the standard screw socket in most North American fixtures, and it runs on 120V at 60Hz. No adapter or socket change needed to swap it in for a standard incandescent ST19.
2) How much light does the 4.5W Satco S8612 amber LED actually put out compared to the incandescent it replaces?
It produces 350 lumens at 4.5 watts and is rated as a 40W incandescent equivalent. The amber glass and 2000K color temperature mean the light reads warm and dim on purpose, closer to a vintage filament glow than general room lighting, so plan on using it where the look matters more than brightness.
3) Can I put the Satco S8612 ST19 LED on a dimmer?
Yes, the S8612 is a dimmable lamp. It draws 0.038A on a 120V circuit, so a large group of them on one dimmer can fall below the dimmer's minimum load and flicker or fail to start. Where a bar or restaurant is running a long run of these, check the dimmer's minimum load rating against the total connected wattage.
4) Is the Satco amber ST19 LED filament bulb safe to use in an enclosed fixture?
It is an enclosed rated lamp, so sealed jars, globes, and closed lanterns are fine. It also carries a damp location rating, which covers covered porches, bathrooms, and canopy areas, but not direct exposure to rain or a wet location.
5) Will this amber Satco bulb match the color of my other 2700K vintage LED bulbs?
No. The S8612 is 2000K with a transparent amber lens, noticeably more orange and dimmer looking than a 2700K soft white lamp. Mixing the two in the same fixture or on the same run will read as a color mismatch, so standardize the whole group on 2000K amber if that is the look you want. Color temperature is fixed, not selectable, and it is not a three-way lamp.
6) Can I install the Satco S8612 base up in a pendant, or does it have to hang down?
Burning position is universal, so base up, base down, or horizontal all work. It is an LED filament lamp with a 360 degree beam spread, which means the light comes off the whole envelope rather than one face, so exposed pendants and open cage fixtures look the same in any orientation.
7) Does the Satco S8612 meet California Title 24 for a hospitality or multi-family project?
Yes, the S8612 is listed as Title 24 compliant and FCC compliant. It is not DLC listed, so if a utility rebate program you are filing under requires DLC, this lamp will not qualify for it.
8) How often will I be relamping these amber ST19 bulbs in a restaurant or hotel lobby?
Average rated life is 15,000 hours. Running 12 hours a day that works out to roughly 3.4 years per lamp, which is why these get specified for high ceilings and chandelier runs where getting a lift in is the real cost.
9) Is 80 CRI good enough for the Satco S8612 in a guest-facing space?
The S8612 is rated 80 CRI, which is the normal benchmark for general and decorative lighting. Keep in mind that the amber lens and 2000K point shift color rendering heavily toward warm tones regardless of CRI, so this is a lamp for atmosphere and exposed filament appearance, not for spaces where accurate color judgment matters like retail merchandise or artwork.
10) What is the exact part number and packaging for the Satco amber ST19 LED?
Order it as Satco S8612. It is the 4.5W ST19 amber filament LED, medium base, 2000K, 350 lumens, 120V, and it ships carded rather than in bulk case pack.
How fast can I get the Satco Lighting S8612 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S8612 come with a warranty?
Absolutely. The Satco Lighting S8612 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S8612?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S8612 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.