SATCO Lighting S9583 4.5W A19 LED, Amber, Medium Base, 2000K, 350 Lumens, 120V

Yes. The S9583 uses an E26 medium base, which is the standard screw socket in North American lamps, wall sconces, and enclosed ceiling fixtures. It runs on 120 volts line voltage, so no driver or transformer is needed.

Electrically, yes, it is a 120V E26 lamp like any standard A19. Visually, no. At 2000K with amber glass it will read noticeably more orange next to 2700K or 3000K soft white lamps in the same multi-light fixture or the same sightline. If you are relamping a property, run amber on its own fixtures or replace all lamps in a given fixture at once.

The S9583 puts out 350 lumens at 4.5 watts. That is accent-level light, not task or general room lighting. For reference, a standard 40W incandescent A19 is in the 400 to 450 lumen range, so this sits just below it while drawing about a tenth the power. Amber bulbs are specified for look rather than output.

Very warm and deeply golden. At 2000K the S9583 is well below the 2700K of a typical soft white household bulb and below the 2400K of a vintage filament look, so it reads as a candle or sodium-lamp glow rather than white light. The amber glass reinforces that. It is chosen for exposed-bulb fixtures, restaurant and hospitality spaces, string light runs, and outdoor entry lighting where a warm tone is wanted.

A19 is the standard pear-shaped household bulb envelope, the same profile as the common incandescent A19 it replaces, so it drops into existing sockets and shades without a fit change. Confirm socket depth only on tightly shrouded decorative fixtures.

Order by Satco number S9583, factory code 4.5A19/AMB/LED/E26/20K/120V. Amber is the only finish offered, so there is no color temperature or base variation to specify on this item.