SATCO Lighting S8749 8W LED PL...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$11.63
Satco Lighting SAT-S8749 8 Watt LED PL GU24 base - 5000K - Type B - Ballast Bypass - 960 Lumens - 50000 Average rated hours - 120 deg. Beam Angle - 120-277 Volt

SATCO Lighting S8749 8W LED PL GU24 Base, 5000K, Type B, Ballast Bypass, 960 Lumens, 50000 Avg Rated Hours, 120 degree Beam Angle

(No reviews yet) Write a Review

Model: S8749
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$11.63
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

SATCO Lighting S8749 8W LED PL GU24 Base, 5000K, Type B, Ballast Bypass, 960 Lumens, 50000 Avg Rated Hours, 120 degree Beam Angle

8 Watt LED PL GU24 base - 5000K - Type B - Ballast Bypass - 960 Lumens - 50000 Average rated hours - 120 deg. Beam Angle - 120-277 Volt

Manufacturer Resources

Spec Sheet

Product Specs

Amps:
0.067-0.029A
Avg Rated Hours:
50000
BAA Compliant:
No
Ballasting Requirements:
Ballast Bypass
Burning Position:
Universal
CA Web Text:
Non-Compliant
CCT Selectable:
No
CRI:
83
DLC Approved:
No
Dimmable:
No
Enclosure Rating:
Enclosed Rated Lamp
FCC Compliant:
Yes
Housing Color:
White
Lamp Base:
Bi Pin GU24
Lamp Filament:
LED
Lamp Shape:
PL
Lens Finish:
Frost
Lensed:
Yes
Lumens:
960L
Operating Frequency:
50/60Hz
Product Type:
PL
Subcategory:
LED
Technology:
LED
Three-Way:
No
Warranty:
5 Year Limited - 10 hr per day
Product Group:
Indoor Lighting
Product Subgroup:
Light Bulbs
Incandescent Equivalent:
40W
Product Voltage:
120V-277V
Beam Spread Angle:
120
Light Temperature:
5000K
Product Category:
Light Bulbs
Product Wattage:
8W
Product Weight:
0.24 lb

Satco Lighting S8749 – Frequently Asked Questions

1) Does the Satco S8749 GU24 LED PL lamp need the existing CFL ballast removed?
Yes. The S8749 is a Type B ballast bypass lamp, so it runs on line voltage direct to the socket. Any existing ballast in the fixture has to be removed or bypassed and the GU24 socket wired straight to line. It accepts 120V through 277V at 50/60Hz, so it works on either common commercial circuit.
2) Will the S8749 fit a pin-base CFL socket, or do I need a GU24 socket?
It is a GU24 bi-pin twist-lock base only. It will not go into a G24q, GX24q or other 2-pin/4-pin plug-in CFL socket. If the can or ceiling fixture already has a GU24 socket (common on newer residential and multi-family retrofits), the lamp drops in once the ballast is bypassed.
3) Can I use this 8W LED PL lamp in an enclosed or shower-trim fixture?
Yes. The S8749 is an enclosed rated lamp, so it can be installed in a sealed or gasketed fixture without voiding its rated life. It also burns in any position, base up, base down or horizontal, which matters in wall sconces and cans.
4) Is the Satco S8749 dimmable?
No. This 8W GU24 PL lamp is non-dimming. On a dimmer circuit expect flicker, buzz or no start at all, so put it on a standard on/off switch or an occupancy sensor rated for LED loads. If the space needs dimming, you need a different lamp.
5) What incandescent or CFL wattage does an 8W 960 lumen GU24 LED replace?
Satco rates the S8749 as a 40W incandescent equivalent, putting out 960 lumens on 8 watts. Current draw is 0.067A at 120V down to 0.029A at 277V, so a lot of these can sit on one circuit compared to the CFLs they replace.
6) Will 5000K match the rest of the lamps in my building?
The S8749 is fixed at 5000K, a cool daylight white typical of garages, stairwells, laundry and back-of-house areas. It is not color selectable, so it will read noticeably bluer next to 2700K or 3000K lamps in the same sightline. CRI is 83, and the frosted lens with a 120 degree beam gives general room wash rather than a spot.
7) Does the S8749 qualify for DLC utility rebates or Buy American projects?
No on both counts. This lamp is not DLC listed, so it will not clear rebate programs that require a DLC qualified product, and it is not BAA compliant, which rules it out of federal jobs carrying a Buy American requirement. It is FCC compliant.
8) Can I spec the Satco S8749 on a California job?
Satco flags this lamp as non-compliant for California, so it should not be specified where Title 20 compliant lamps are required. For California work choose a listed compliant GU24 LED instead.
9) How long will these last in a common-area fixture that runs all night?
Rated at 50,000 average hours. Run continuously that is roughly 5.7 years; on a 12 hour overnight schedule it is over 11 years of service. For a property manager standardizing stairwell and corridor GU24 cans, that is the relamp interval to plan against.
How fast can I get the Satco Lighting S8749 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S8749 come with a warranty?
Absolutely. The Satco Lighting S8749 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S8749?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S8749 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!