You may also like
SATCO Lighting S9201 6W, G25 Globe LED, 3000K, Medium Base, 120V
6 Watt - G25 Globe LED - 3000K - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.050A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA T20 Alt Sub:
- S8576
- CCT Selectable:
- No
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Filament:
- LED
- Lamp Shape:
- G25
- Lens Finish:
- Frost
- Lensed:
- Yes
- Lumens:
- 450L
- Operating Frequency:
- 60Hz
- Product Type:
- Globe
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Bulb Base:
- Medium
- Incandescent Equivalent:
- 40W
- Location Rating:
- Damp
- CRI:
- 80
- Title 20:
- No
- Subcategory:
- LED
- Bulb Type:
- LED
- Product Voltage:
- 120V
- Beam Spread Angle:
- 175
- Light Temperature:
- 3000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 6W
- Country of Origin:
- China
- Product Weight:
- 0.17 lb
Satco Lighting S9201 – Frequently Asked Questions
1) Will the Satco S9201 G25 globe bulb work in an enclosed vanity fixture?
Yes. The S9201 is an enclosed rated lamp, so it can go in a fully enclosed vanity or bath globe fixture without voiding its rating. It is also damp location rated, which covers bathrooms and covered porches, but not direct wet exposure. Burning position is universal, so base up, base down, or horizontal all work.
2) What incandescent bulb does this 6W G25 LED globe replace?
It replaces a 40W incandescent G25 globe. The S9201 draws 6 watts and puts out 450 lumens at 3000K, so brightness lands in the same range as the 40W it swaps for while cutting load. On a bath bar with three or four sockets that is a meaningful drop in draw at 0.050A per lamp.
3) Can I ship the S9201 into California, and what do I use if not?
The S9201 is not a Title 20 compliant lamp. Satco lists S8576 as the California Title 20 alternate substitute for it, so that is the part number to specify for jobs in that jurisdiction. Everywhere else, the S9201 is the standard order.
4) Can I put this Satco globe LED on a dimmer?
The S9201 is dimmable on 120V. It is not a three-way lamp, so it will not step through low/medium/high in a three-way socket, and it is not CCT selectable, meaning the color stays fixed at 3000K through the dim range rather than warming as you lower it.
5) Is 3000K too yellow for a bathroom, or should I get a cooler globe?
3000K is soft white, warmer than a neutral 3500K or 4000K but cleaner than a 2700K incandescent tone. For residential baths and hospitality guest rooms it reads warm without going amber. CRI is 80, which is normal for general-purpose lamps. If you are standardizing a building, keep every globe at 3000K, since mixing this with a 4000K lamp in the same bar is visible immediately.
6) Will this bulb glare in an open-globe fixture where the lamp is visible?
The S9201 has a frosted lens and a white housing, so the diode array is diffused rather than exposed. That matters in fixtures where the bulb shows, like exposed vanity bars and open pendants. Beam spread is 175 degrees, close to the all-around throw of the incandescent globe it replaces.
7) How long does this G25 LED last compared to the globe I am replacing?
Average rated life is 25,000 hours. For a property manager relamping vanity globes across units, that is the number that decides whether it is worth swapping out working incandescents: the 40W globe this replaces is typically rated around 1,000 hours, so you are cutting relamp trips dramatically.
8) Is the Satco S9201 DLC listed for a utility rebate?
No. The S9201 is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. It is FCC compliant for radio interference. If a rebate is driving the spec, check whether the program accepts ENERGY STAR or DLC before committing to this lamp.
How fast can I get the Satco Lighting S9201 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9201 come with a warranty?
Absolutely. The Satco Lighting S9201 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9201?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9201 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.