You may also like
SATCO Lighting S9387 4.5W PAR16 LED, 5000K, 40 degree Beam Angle, Medium Base, 120V
4.5 Watt PAR16 LED - 5000K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.038A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR16
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 360L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 45W
- Location Rating:
- Damp
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 4.5W
- Product Weight:
- 0.11 lb
Satco Lighting S9387 – Frequently Asked Questions
1) Can I use this LED PAR16 in a fully enclosed fixture?
Yes. The S9387 is an enclosed rated lamp, so it can go in a sealed or closed-glass fixture where heat builds up. Many LED lamps are not rated for that and fail early; this one is. Burning position is universal, so base up, base down, or horizontal are all fine.
2) Is this PAR16 LED safe to use outdoors or in a covered porch fixture?
The lamp is rated for indoor use and damp locations only. A covered, non-weather-exposed spot like a soffit, porch ceiling, or bathroom is acceptable. Anywhere rain or direct water can hit the lamp needs a wet-location rated lamp instead.
3) What incandescent PAR16 does this 4.5W LED replace, and how much light does it actually put out?
It replaces a 45W incandescent PAR16 while drawing 4.5 watts, 0.038 amps. Output is 360 lumens with a 40 degree beam spread, which is a flood pattern suited to general accent and display lighting rather than a tight spot. On a 20A, 120V branch circuit the low current draw means you can load many more lamps per circuit than with the 45W originals.
4) Is 5000K going to match the other bulbs in my building?
At 5000K this is a daylight white, a cool blue-white that reads very differently from the 2700K warm white of an incandescent or the 3000K and 4000K lamps common in commercial spaces. The color temperature is fixed, not CCT selectable, so if the surrounding fixtures are warmer the mismatch will be obvious. For standardizing a space, pick one CCT and run it everywhere. CRI is 80, typical for general commercial lighting and adequate for corridors, offices, and retail back-of-house, though not for color-critical display.
5) Will the S9387 work on a dimmer, and will it work in a three-way socket?
Dimmable, yes, so it can run on a standard line-voltage dimmer circuit. It is not a three-way lamp, so in a three-way socket it will only operate at full output on whichever contact it picks up. For stepped control in a three-way fixture you need a lamp specifically built for it.
6) Is the S9387 a spot or a flood, and what spacing does the beam suit?
It is a flood. The 40 degree beam spread with a clear lens throws a wide, even pool rather than a focused highlight, which suits general downlighting, wall washing, and closer-spaced track runs. If you need a tight accent on artwork or merchandise, specify a narrower beam angle PAR16 instead.
7) Does this Satco LED qualify for a utility rebate through DLC?
The S9387 is not DLC approved, so it will not qualify under programs that require a DLC listing. It is FCC compliant for electromagnetic emissions. For rebate-driven retrofits, specify a DLC listed lamp instead.
8) What part number do I order for the 5000K 40 degree PAR16, and where is the spec sheet?
Order Satco MPN S9387 for the 4.5W PAR16 LED at 5000K with the 40 degree beam and medium base. It is a single configuration, clear lens, so there are no finish or wattage options to pick. Satco publishes the full spec sheet at https://media.distributordatasolutions.com/269/xlsx_satco/9151d327e1cce88dcc6cec5a0c6bc157ff933aff.pdf. Country of origin is China, which some government and institutional procurement rules require on the submittal.
9) What does the Satco S9387 lamp look like installed, and how heavy is it?
White housing with a clear lens, in the standard PAR16 reflector shape. Each lamp weighs 0.11 lb, so it puts almost no load on gimbal rings, lightweight track heads, or older sockets that struggled with glass halogen PAR lamps.
How fast can I get the Satco Lighting S9387 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9387 come with a warranty?
Absolutely. The Satco Lighting S9387 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9387?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9387 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.