You may also like
SATCO Lighting S9389 6.5W PAR16 LED, 5000K, 40 degree Beam Angle, Medium Base, 120V
6.5 Watt PAR16 LED - 5000K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.054A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- Lawful for sale
- CCT Selectable:
- No
- CRI:
- 80
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- White
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR16
- Lens Finish:
- Clear
- Lensed:
- Yes
- Lumens:
- 500L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 5 Year Limited - 10 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 60W
- Location Rating:
- Damp
- Location Indoor/ Outdoor:
- Indoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 40
- Light Temperature:
- 5000K
- Product Category:
- Light Bulbs
- Product Wattage:
- 6.5W
- Product Weight:
- 0.11 lb
Satco Lighting S9389 – Frequently Asked Questions
1) What incandescent wattage does the 6.5W Satco PAR16 LED replace?
It replaces a 60W incandescent PAR16 at 6.5 watts, putting out 500 lumens and drawing 0.054 amps. For a property manager swapping a fixture full of them, that is roughly a tenth of the load per socket, which matters on older circuits running long track or recessed runs.
2) Can I use this LED PAR16 in an enclosed or fully sealed fixture?
Yes. The S9389 is an enclosed rated lamp, so it can be installed in a sealed or gasketed fixture without the heat buildup that shortens the life of non-enclosed-rated LEDs. It also mounts in any burning position, base up, base down, or horizontal.
3) Is this Satco PAR16 LED rated for outdoor use under a soffit or covered entry?
No, not for open outdoor exposure. It is a damp location rated, indoor lamp. Damp rating covers humid indoor spaces like bathrooms and covered areas that stay dry, but it is not wet rated for direct rain or an unprotected exterior fixture. For open weather exposure you need a wet location rated PAR lamp.
4) Will 5000K match the warm bulbs already in my building?
No. At 5000K this is a daylight white lamp, a cool blue-white that reads clearly next to the 2700K to 3000K warm light most residential and hospitality fixtures use. Mixing them in the same room or the same track run looks wrong. Use 5000K where you want crisp task light, parking structures, back of house, shops, and standardize the whole run on it.
5) Is the 40 degree beam on this PAR16 a spot or a flood?
Forty degrees is a flood beam, not a spot. It spreads light broadly enough for general downlighting in recessed cans, track heads, and retail display rows. If you are trying to punch a tight pool of light on artwork or a single display piece, a narrower spot beam is the better tool.
6) Does the Satco S9389 PAR16 LED work on a dimmer?
It is a dimmable lamp on 120V line voltage. It is a single fixed output lamp, not a three-way, so do not put it in a 3-way socket expecting stepped levels. Color stays fixed at 5000K as well, since it is not a CCT selectable lamp.
7) Is the Satco S9389 DLC listed for a utility rebate?
No. The S9389 is not DLC approved, so it will not qualify under rebate programs that require a DesignLights Consortium listing. It is FCC compliant for electromagnetic interference, and it is lawful for sale in California.
8) What part number do I order for the Satco 6.5W 5000K PAR16 flood?
Order Satco S9389. That is the manufacturer part number for the 6.5W PAR16 LED, 5000K, 40 degree beam, medium base, 120V, clear lens. It is a single configuration, so there is no beam angle or color temperature to specify separately on the order.
9) Does this PAR16 have a clear lens or a frosted one?
Clear lens over a white housing. The clear lens keeps the 40 degree flood beam defined rather than diffusing it, so the beam edge stays visible on a wall wash or display. The white body blends into white recessed trims and ceilings.
How fast can I get the Satco Lighting S9389 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S9389 come with a warranty?
Absolutely. The Satco Lighting S9389 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S9389?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S9389 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.