You may also like
SATCO Lighting S29409 6.5W, PAR20 LED, 5000K, 40 degree Beam Angle, Medium Base, 120V
6.5 Watt - PAR20 LED - 5000K - 40 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Product Weight:
- 0.13 lb
- Dimmable:
- Yes-Dimmable
- CRI:
- 90+
- Product Material:
- Plastic
- Lumens:
- 520L
Satco Lighting S29409 – Frequently Asked Questions
1) What wattage halogen PAR20 does this 6.5W Satco LED replace?
At 6.5 watts the S29409 puts out 520 lumens, which lands it in the range a 50 watt halogen PAR20 covers. Same medium base, same 120 volt circuit, so it is a direct lamp-for-lamp swap in an existing fixture with no wiring change.
2) Is the Satco S29409 PAR20 LED dimmable on an existing wall dimmer?
It is a dimmable lamp. Note that LED lamps need an LED-compatible (or electronic low-voltage/trailing-edge) dimmer to dim smoothly; older magnetic halogen dimmers running a single 6.5 watt lamp often sit below their minimum load and flicker or drop out.
3) What does 5000K look like, and will it match the bulbs already in my building?
5000K is daylight white, a crisp blue-white with no warmth to it. It will not match 2700K or 3000K warm-white lamps in the same ceiling, so if you are relamping a space one fixture at a time, do the whole run in 5000K or the mismatch is obvious. For retail display or parking garage and stairwell work where you want high visual clarity, 5000K is the usual pick.
4) Does this Satco PAR20 have good enough color rendering for retail or showroom use?
Yes. The S29409 is rated 90+ CRI, which is the threshold specifiers call for in retail, gallery, hospitality, and healthcare spaces where merchandise color and skin tones have to read correctly. Most commodity LED PAR lamps sit at 80 CRI.
5) Can I use this PAR20 LED outdoors in a wet location or an enclosed fixture?
The S29409 is an indoor lamp. Treat exterior soffit cans, wet-location trims, and fully enclosed or sealed fixtures as a different lamp selection; heat trapped in an enclosed housing shortens LED driver life, and no wet-location rating applies here.
6) Is the Satco S29409 PAR20 lens clear or frosted?
Clear. The lens finish is clear, which keeps the 40 degree flood beam defined rather than diffusing it. The lamp body is plastic, so it weighs only 0.13 lb, which matters on spring-clip track heads and older gimbal trims that were never loaded for a heavy glass lamp.
How fast can I get the Satco Lighting S29409 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29409 come with a warranty?
Absolutely. The Satco Lighting S29409 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29409?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29409 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.