SATCO Lighting S29404 6.5W, PAR20 LED, 5000K, 25 degree Beam Angle, Medium Base, 120V

Yes. The S29404 is an enclosed rated lamp, so it can run inside a sealed or fully enclosed fixture without the heat trapping problems that shorten the life of non-rated LEDs. It is also wet location rated and listed for both indoor and outdoor use, which covers recessed cans in soffits, covered entries and exterior eyebrow fixtures.

Only if those fixtures are also 5000K. The S29404 is a fixed 5000K daylight color, not a selectable CCT lamp, so it will read noticeably cooler and bluer next to 2700K or 3000K lamps in the same space. Where color accuracy matters, such as retail or inspection areas, the 90 CRI rating is the number to quote.

25 degrees is a narrow flood. It throws a tight, controlled pool of light, which is what you want for accenting artwork, merchandise displays, signage, or high ceilings where you need the light to reach the floor without spilling. For general room washing or closely spaced downlights over a lobby or corridor, a wider flood beam is the better pick. The S29404 also has a clear lens, which keeps the beam edge crisp rather than diffused.

No. This PAR20 is not DLC approved, so it will not qualify under programs that require a DesignLights Consortium listing. It is noted as lawful for sale in California.

Any orientation works. Burning position is universal, so base up in a recessed can, base down in a pendant, or horizontal in a track head are all fine. Rated life is 25,000 hours.

No. The S29404 PAR20 is not a three-way lamp. Screwed into a three-way socket it will operate at a single output level rather than stepping, so use a standard single-level socket or pair it with a dimmer instead, since the lamp is dimmable.

The housing is silver with a plastic base and a clear thermoplastic (PBT) lens rather than glass, which makes it less prone to breakage in high fixtures and outdoor heads. It carries a wet location rating for exterior use and is FCC compliant.