You may also like
SATCO Lighting S29400 6.5W, PAR20 LED, 2700K, 25 degree Beam Angle, Medium Base, 120V
6.5 Watt - PAR20 LED - 2700K - 25 deg. Beam Angle - Medium base - 120 Volt
Manufacturer Resources
Spec Sheet
Product Specs
- Amps:
- 0.054A
- Avg Rated Hours:
- 25000
- Burning Position:
- Universal
- CA Web Text:
- California T24 Listed
- CCT Selectable:
- No
- CRI:
- 90
- DLC Approved:
- No
- Dimmable:
- Yes
- Enclosure Rating:
- Enclosed Rated Lamp
- FCC Compliant:
- Yes
- Housing Color:
- Silver
- Lamp Base:
- Medium
- Lamp Filament:
- LED
- Lamp Shape:
- PAR20
- Lens Finish:
- Clear
- Lens Material:
- Thermo Plastic (PBT)
- Lensed:
- Yes
- Lumens:
- 520L
- Operating Frequency:
- 60Hz
- Product Type:
- PAR
- Subcategory:
- LED
- Technology:
- LED
- Three-Way:
- No
- Warranty:
- 3 Year Limited - 12 hr per day
- Product Group:
- Indoor Lighting
- Product Subgroup:
- Light Bulbs
- Incandescent Equivalent:
- 50W
- Location Rating:
- Wet
- Base Material:
- Plastic
- Location Indoor/ Outdoor:
- Indoor;Outdoor
- Product Voltage:
- 120V
- Beam Spread Angle:
- 25
- Light Temperature:
- 2700K
- Product Category:
- Light Bulbs
- Product Wattage:
- 6.5W
- Product Weight:
- 0.13 lb
- Product Material:
- Plastic
Satco Lighting S29400 – Frequently Asked Questions
1) Can the Satco S29400 PAR20 LED go in a fully enclosed recessed can or an enclosed outdoor fixture?
Yes. The S29400 is an enclosed rated lamp, so it can be installed in sealed or fully enclosed fixtures where most LED lamps are prohibited. It also carries a Wet location rating and is rated for indoor or outdoor use, which covers soffit cans, covered entries and exterior eyebrow fixtures. Burning position is universal, so it can point up, down or sideways.
2) What incandescent PAR20 does the 6.5W Satco S29400 replace?
It is a 50W incandescent equivalent, pulling 6.5 watts at 120 volts and 0.054 amps while delivering 520 lumens. On a circuit that was loaded with 50W PAR20 halogens, you can run roughly eight of these for the draw of one of the old lamps, which is the usual reason property managers swap a whole building's track and recessed heads at once.
3) Is the Satco 6.5W PAR20 LED dimmable?
Yes, the S29400 is a dimmable lamp. It is not a three-way lamp, so it will not step through levels in a three-way socket, and it is not CCT selectable, meaning the color is fixed at 2700K with no switch on the lamp.
4) Does the Satco S29400 PAR20 meet California Title 24?
It is California T24 listed, which matters for residential and multi-family work in California where Title 24 requires high-efficacy lamps in certain rooms. The lamp is also FCC compliant. It is not DLC approved, so it would not qualify for a utility rebate program that requires a DLC listing.
5) Can I run the Satco S29400 on 277V or a low-voltage track system?
No. This PAR20 is a 120 volt, 60 Hz lamp with a medium screw base. For 277V commercial circuits or 12V low-voltage track, you need a lamp rated for that supply, not this one.
6) How long does the Satco 6.5W PAR20 LED last before relamping?
Average rated life is 25,000 hours. In a lobby or exterior fixture burning 12 hours a day that is roughly five and a half years between relamps, which is the whole argument for swapping halogen PAR20s in hard-to-reach cans and high ceilings.
7) What is the Satco S29400 lamp made of, and does it have a glass lens?
The lamp body and base are plastic, and the lens is clear thermoplastic (PBT) rather than glass. That makes it a lighter, break-resistant lamp at 0.13 lb, which is worth knowing for track heads and high-traffic areas where a glass halogen PAR gets knocked.
How fast can I get the Satco Lighting S29400 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Satco Lighting S29400 come with a warranty?
Absolutely. The Satco Lighting S29400 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Satco Lighting S29400?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Satco Lighting S29400 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.